Size of sheet is mentioned in length , width [either in millimeters(mm) or meters(m)]
and thickness in millimeters(mm)
Base Density of Aluminum - 2710 kg/cubic meter
For 6 mm thickness of sheet for dimensions length - 2438mm width -1219mm
Weight of sheet is calculated as follows -
-Convert length and width dimensions of mm into meters
2438/1000 = 2.438m and 1219/1000 = 1.219m and 6.3/1000 = .0063m
- Area per sheet - 2.438 x 1.219 = 2.97 sq.m
- Weight = Area x thickness x density = 2.97 x .0063 x 2710 = 50.7 kgs approx.
Consider the sheet as two parts, one: plain sheet(A) and the other: the chequered portion (B).
The plain sheet weight (A) is:
length (m) X breadth (m) X thickness (mm) X 2710 / 1000
The chequered portion weight (B) is:
length (m) X breadth (m) X 0.699
The chequered sheet weight is (A) + (B).
You measure its mass, in kilograms, using a balance or scales and then multiply by gravitational acceleration (9.8 metres/second2) to get its weight (in Newtons).
Add extra over wt as 6.15kg
kg/sq. m
put it on a scale
5mm thick chequered plate weiht per square metre
Gas cutting & burning loss calculation chart required for mild steel plate?
The density of steel is 7850 KG/M3
What is the formula of calculating tower crane load chart. ------------------------------------------------------------------------------- All cranes should have a load chart/ information plate mounted near the operator's position, or in the operator's cab. Also, an operator's manual should be located close at hand as well, often on the back or under the operator's seat.
how to calculate the weight of 30x30 squre tube 2mm thick
4mm chequered plate unit weight
chequered plate 5 mm thickness weight is 45.4 kg
Any thicknes plate length x with x thicknes x2.1 per plate
4mm chequered plate unit weight
6mm chequered ms plate per square meter weight
3x1250x5000
68.95
53.2
53.27 kg/sq.m
Give me answer in words?
25KG
5mm thick chequered plate weiht per square metre