Toilets use float valves. These are air filled balls that float on the water, as the cistern fills with water the ball floats higher. The ball is attached to an arm connected to a valve, when the ball reaches a predefined level the valve closes, shutting off the water to the cistern.
The fill valve (ball valve UK) is siezed or clogged. As the water level rises, the float-ball rises and closes the valve when the water reaches the proper level.
Your question isn't very clear. Toilet must be leaking somewhere. Shut off valve, supply line, the seal between the tank and the bowl or the wax ring underneath the toilet. In warm weather, the tank can sweat if the water filling it is cold in high humidity. It pretty much has to be one of these places.
Only if it is leaking there. They do sometimes, but not that often. If you have taken the tank off for some reason, you should probably go ahead and change it.
You need your septic tank cleaned out.
this is when you go number 2 in the tank of a toilet instead of in the bowel.
There should be shut off valve called an angle stop towards the floor on the left side of your toilet. If you shut this valve by turning it clockwise this will stop the feed of water to the tank of your toilet.A:Your float valve may be defective or worn out
seal to stop water from runing into tank located between tank and bowk
In a toilet tank or water reservior to regulate filling.
There could be several reasons why your toilet tank is not filling up properly. Some common causes include a faulty fill valve, a clogged water supply line, or a problem with the float mechanism. It is recommended to check these components and make any necessary repairs or replacements to ensure proper filling of the tank.
Your toilet tank may not be filling up properly because there could be a problem with the fill valve or the float mechanism. These parts regulate the water flow into the tank and may need to be adjusted or replaced if they are not functioning correctly.
Your toilet tank may not be filling with water due to a faulty fill valve, a clogged water supply line, or a problem with the float mechanism. Check these components to determine the cause of the issue and make necessary repairs or replacements.
Your toilet tank may be filling too high due to a faulty fill valve or an improperly adjusted float. This can lead to water overflowing into the overflow tube, causing the tank to fill excessively. Adjusting the float or replacing the fill valve can help resolve this issue.
To stop a running toilet, you can adjust the float valve in the tank or check and replace the flapper if it is not sealing properly.
Assuming you have a regular tank toilet with a ball float and rubber flap and that the water is turned on and the tank is filling, the most common cause of a toilet not flushing is a broken or detached chain that runs from the handle lever to te rubber flap that keeps the water in the tank.
Install a tempering valve in water line feeding toilet. Tempering valve will mix hot and cold water together so warm water fills toilet tank which will stop condensation.
Your toilet may keep running after you flush due to a faulty flapper valve, a problem with the fill valve, or a leak in the tank. These issues can prevent the tank from filling properly and cause the toilet to continue running.
A continuously running toilet may be caused by a faulty flapper valve, a problem with the fill valve, or a leak in the tank. These issues prevent the tank from filling up properly and can lead to wasted water. It is important to address the problem promptly to prevent water waste and potential damage to the toilet.