0
What else can I help you with?
What is a Phillips screwdriver?
A hand tool made to turn Phillips head scews. Instead of a straight slot, they have a cross shaped slot that tapers in at the center.
What were the earliest windmills used for?
they were used for capsureing windthey were used for capsureing wind
What was irrigation used for?
irrigation was used for watering crops and was occasionally used for drinking.
Used to store data when the data is not being used in memory?
A storage device is used to store data when data is not being used in memory.
How long has cement been used?
It was first used in ancient rome. its been used since then
What and how many scews are used on a 1978 corvette console?
there are 15 crews on a 78 and 79
How do you change the brakelamp on a 2002 Chevy Trailblazer?
Open the rear hatch to access the mounting scews for the tailight assembly. Remove the scews and drop out the tailight assembly. The rest is self explanitory unless you have a fried circuit board for the taillights.
How do you depress rear disc brake caliper on Ford Freestar?
Turn the piston clockwise and it scews itself in...
How do you remove dash on 1989 camaro?
Very simple, take out the 21 scews on the bottom of the dash pading and the panel will lift off.
How do you remove the center cap on a 1996 Honda Passport?
You must remove the wheel because there are scews that hold it onto the inside of the wheel.
How do you replace a front turn signal on a 2005 Dodge Ram truck?
You need to remove the head lap it has some scews on the side and on front.
Where is the cabin filter on a 2001 Mazda tribute?
passenger side under hood, where the hood meets the windshield you have to remove a few scews on the plastic trim
What is a Phillips screwdriver?
A hand tool made to turn Phillips head scews. Instead of a straight slot, they have a cross shaped slot that tapers in at the center.
How do you replace the tail turn signal light on a 2000 Honda Odyssey?
Open the tub of the turn signal housing and uncrew the 2 scews holding it and pull out the whole housing .
What is difference between countersink and countersunk?
Countersink and countersunk are the same meaning. Countersink is English word Countersunk is German word <><><><> Present tense, and past tense. "I need to counersink these screws." "These scews were countersunk" Countersink can also be a noun- name of the tool used for that purpose. "The screws were countersunk with a countersink."
How do you change the headlights of a Opel Vectra 1.8i of 1992?
u need to drop d bumper by unscewing the scews beside front weels this will alow u to take out d light
How do you get the stock radio out of your 1995 Mazda mx-6?
there is 4 screws in face panle 2 when u pull out ashtry and 2 more where the try at the bottem of face panle .when u have 4 scews out .then u need to pull out panle it is cliped half wayup on both sides .once that is of u will see a metal frame that holds radio it has 4 scews in frunt remove them and u can slid radio out u will be able to unplug wires that's it
