Just like any other substance, steam cools on contact with anything around it that's
cooler. In the case of steam ... rising, let's say, from something on the stove ... it's
cooled by the air it passes through, and by anything else it drifts past, such as the
cool pots elsewhere on the stove, or the walls and ceiling of the kitchen.
BUT ... if you're thinking about cooling some steam enough so that you can hold it in
your hand, then forget about it. Remember that water turns to steam when you heat
it to 212 degrees. It works exactly the same in the other direction ... as soon as you
cool some steam down below 212 degrees, it turns to water !
A desuperheater cools superheated steam by introducing a cooling medium, typically water, into the steam flow. As the water sprays or mixes with the steam, it absorbs heat, causing the steam's temperature to decrease. This process often involves heat exchange and can efficiently bring the steam down to a desired saturation temperature without condensing it entirely. The result is cooler, lower-energy steam suitable for various applications.
James Watt improved the steam engine because he had an interest in steam engines.He also had amazing skills in mathematics and engineering.He couldn't turn down an incredible oppertunity to improve a steam engine.
In a back pressure turbine all available energy from the inlet steam is NOT used to generate power; steam exhausts at a tangible pressure and is then used for, usually, heating or chemical processing. In a condensing turbine, all the inlet steam does mechanical work right down to the lowest pressureafter which it is condensed in a heat exchanger
If your chimney flue is cool enough, water will condense inside, and then evaporate via steam when the boiler fires. You may also have water coming in from rain, and may want to purchase a chimney cap to prevent water from getting in.
Saturated steam occurs when steam and water are in equilibrium. If you have a closed container of water and heat it, above 100 celsius the steam pressure will start to rise, and as the temperature continues to rise, the pressure will go on rising. What is happening is that steam is being evolved to match the temperature (steam tables will give this relation) and the steam conditions are said to be saturated because if the pressure is raised by external means, some of the steam will start to condense back to water.If the steam pressure is held at a lower level than that achieved at saturation, by taking steam off to feed a turbine or other steam usage, there is effectively an excess temperature for that pressure, and the steam is said to be superheated. It in fact then becomes dry, and behaves as a gas. The amount of superheat can be quantified as so many degrees of superheat (celsius or fahrenheit).Turbine designers want steam to be superheated before reaching the turbine, to avoid condensation causing blade erosion, and steam producing boilers in power plants are designed to produce superheated steam. In plants where no turbines are used, only satured steam is normally generated.In heating applications, saturated steam is preferable, because it has a better energy exchange capacity. Superheated steam must cool down, and become saturated steam, before condensing in a heat exchanger. Also, superheated steam is a thermal insulator, like air.That is why it is necessary to direct superheated steam through a desuperheater before using the steam in heating applications.
You cool it down
Depends on the temperature of the thing you want to cool down. If it's warmer than the steam, then steam will cool it to the temperature of the steam. If it's already cooler than the steam, then steam can't cool it.
You need to cool it down.
the steam rises slowly and it starts to loose its heat
you don't. you just jump over it.
I would assume trap it, and cool it back down
Yes, steam can be changed back into water through a process called condensation. When steam loses heat energy, it changes into water droplets. This can be achieved, for example, by allowing steam to cool inside a container.
Steam - if you cool it down it becomes water - if you freeze it - it becomes ice.
Steam - if you cool it down it becomes water - if you freeze it - it becomes ice.
When steam loses heat energy, it undergoes a phase change and condenses into water. This process is called condensation. The steam molecules slow down and come closer together, forming liquid water droplets.
Only when you are dinning somewhere other than your home, if it is to hot wait for it to cool down, if you can't wait, do it very unnoticeable.
It is absorbed into the drier air from outside the bathroom.