It all depends on the damage. Most problems with concrete are do to water damage or the ground shifting or tree roots.
If the damage is simply small cracks you can use "caulk type" fillers.
If the slab of concrete is not level compared to the next slab (as in a sidewalk) then you can have the slab(s) leveled, by pumping a product beneath the non level item.
If tree roots are pushing up sections... cut that part of the root to stop growth (unless the root is a major root, the tree maybe damaged.)
If the surface is flaking away there are "thin set" products that can repair the surface.
DIY people can do most of the above repair but the pumping repair is usually left to professionals.
What is the easiest way to fix sinking paver stone patio? the first rows next to a concrete slap patio is sinking.
If it is a free floating slab, not tied to the house, you could probably have it mud jacked on the low side depending on what is beside it,
The best concrete for making a concrete bench is Bench concrete.
The concrete was incredibly hard. The concrete was gray.
There are quite a diverse range of concrete types in the Philippines. Some of the types of concrete in this country include Fiber-reinforced concrete, Rapid-setting concrete, Fluid-filled concrete, and Pervious concrete.
how to fix broken concrete drive way be repaired or does it have to be replaced?
To fix cracked concrete, you can use a concrete patching compound or a concrete resurfacer. Clean the cracked area, apply the product according to the instructions, and allow it to dry completely. This will help restore the appearance and strength of the concrete.
To fix cracks in concrete, you can use a concrete patching compound or a concrete caulk. Clean the crack, apply the patching compound or caulk, and smooth it out with a trowel. Allow it to dry completely before using the concrete again.
Plumbers black pipe sealant by Hercules chemical corporation.
To fix a hole in concrete, you can use a concrete patching compound. Clean the area around the hole, apply the compound, and smooth it out with a trowel. Let it dry according to the manufacturer's instructions.
it depends dirt or concrete, dirt for a hole in the ground and concrete in a building.
To fix spalling concrete, you can start by removing the damaged concrete using a chisel and hammer. Then, clean the area thoroughly and apply a concrete patching compound to fill in the gaps. Smooth out the patch and allow it to dry completely before sealing the area with a concrete sealer to prevent future damage.
To effectively fix cracks in a concrete floor, you can use a concrete patching compound or epoxy injection. Clean the crack, apply the chosen material, and follow the manufacturer's instructions for the best results.
To effectively fix cracks in a concrete slab, you can use a concrete patching compound or epoxy injection. Clean the crack, apply the chosen material, and follow the manufacturer's instructions for the best results.
To fix a concrete porch, you can start by cleaning the surface thoroughly and repairing any cracks or damage with a concrete patching compound. After the repairs have dried, you can apply a concrete sealer to protect the surface from future damage and enhance its appearance. Regular maintenance, such as cleaning and resealing, can help prolong the life of your concrete porch.
To fix sunken concrete, you can use a process called slabjacking or mudjacking. This involves drilling holes into the concrete and injecting a mixture of cement, sand, and water underneath to raise and level the slab. This method is cost-effective and can help restore the stability and appearance of the sunken concrete.
I have etching in my inground concrette pool and i need to know how to fix it. the pool was made in 1973 i bought the house three years ago.