A 5-bit adder can be used as a subtractor by utilizing the concept of two's complement. To perform subtraction, you can invert the bits of the number to be subtracted (the subtrahend) and add 1 to it, effectively converting it to its two's complement. Then, you input this modified value along with the minuend into the 5-bit adder. The result will be the difference of the two numbers, allowing the adder to function as a subtractor.
=HA#0-=FA#1-=FA#2-=FA#3-=FA#4-=FA#5-=FA#6-=FA#7=It consists of seven Full-Adder and one Half-Adder, has 2*8 input lines and 9 output line (8+carry).
serial adder: 1) Slower 2) It uses shift registers 3) IT requires one full adder circuit. 4) It is sequential circuit. 5) Time required for addition depends on number of bits. Parallel adder: 1) Faster 2) It uses registers with parallel load capacity 3) No. of full adder circuit is equal to no. of bits in binary adder. 4)It is a combinational circuit 5)Time required does not depend on the number of bits
You will need to use this table to obtain the 5 Bit symbols.4-Bit 5-Bit Code0000 111100001 010010010 101000011 101010100 010100101 010110110 011100111 011111000 100101001 100111010 101101011 101111100 110101101 110111110 111001111 11101
To design a 5-bit comparator using a single 7485 and one additional gate, you can utilize the 7485's built-in capabilities to compare two 4-bit numbers. Connect the 5th bit as an extra input; for instance, use a logic gate (e.g., AND gate) to determine the relationship of the 5th bits of the two numbers. The output of the 7485 can indicate if the first number is greater than, less than, or equal to the second for the first four bits, while the gate can adjust the result based on the 5th bit comparison. This way, you effectively extend the functionality of the 7485 to handle a 5-bit comparison.
Use the regular 4 bit full added, but make one of the inputs 1111 = 2's complimentrepresentation of -1. This will serve to decrement the other number by 1. Throw away the 5th bit, the carry bit. Example If 5 is entered: 0101 + 1111 ______ 0100 = 4 By -: lokesh kourav contact no -: 9201104655
By using 5 NOR gates, we can implements half-subtractor. The inputs for 1st NOR gate are A and B, for 2nd NOR gate inputs are the output of 1st NOR gate and A input, for 3rd NOR gate inputs are the output of 1st NOR gate and B input, for 4th NOR gate the inputs are gates 2 and 3, and for last gate input is the output of the 4th gate.
The ISBN of Dr. Adder is 0-312-94100-5.
=HA#0-=FA#1-=FA#2-=FA#3-=FA#4-=FA#5-=FA#6-=FA#7=It consists of seven Full-Adder and one Half-Adder, has 2*8 input lines and 9 output line (8+carry).
Adder or viper.
5
ADDER
Adder
Adder.
Adder; Viper; Cobra; Mamba
serial adder: 1) Slower 2) It uses shift registers 3) IT requires one full adder circuit. 4) It is sequential circuit. 5) Time required for addition depends on number of bits. Parallel adder: 1) Faster 2) It uses registers with parallel load capacity 3) No. of full adder circuit is equal to no. of bits in binary adder. 4)It is a combinational circuit 5)Time required does not depend on the number of bits
Adder, cobra or viper
5 to 10 miles per hour