You can use ohm's law, which says I=E/R. You should find how many volts that the power supply is, then find out the current flow through the wires. if the current flow is not what it should be, then your resistor is not working properly. Therefore the resitor would be the problem.
To find the equivalent resistance of resistors in series, you simply add their resistances together. In this case, the equivalent resistance ( R_{\text{eq}} ) is calculated as follows: [ R_{\text{eq}} = R_1 + R_2 + R_3 = 20 , \text{ohms} + 12 , \text{ohms} + 8 , \text{ohms} = 40 , \text{ohms}. ] Thus, the equivalent resistance of the circuit is 40 ohms.
ohms law states V = I*R; V = (.005)(1000) = 5volts.
To find the resistance in a circuit, use the equation R = V/I, where R is the resistence in ohms, V is the voltage, and I is the current in amps. Therefore, your equation is R = 120/0.6. Therefore, the resistance is 200 ohms. Hope this helps
In a capacitive circuit, you must first calculate the capacitive reactance (Xc) This is done by 2 x Pi x frequency x the value of capacitor. Then divide one by the answer. This will give you the capacitive reactance in ohms. You can then apply ohms law to find the current. So eg: A 10 ohm resistor is in series with a 150micro farad capacitor across a 230v 50Hz supply. find circuit current. So 2 x pi x 50 x 150E-6(means x10-6 on calc) 2 x 3.14159... x 50 150e-6 = 0.047123889(ans) Now 1/Ans = 21.22 ohms. So you can now add the 21.22 ohms and the 10 ohms together giving 31.22 ohms. This is the total circuit resistance. Now apply ohms law I = V/R So I = 230/31.22 = 10.83 Amps!
To find the resistance of a coil with an impedance of 50 ohms connected across 240V at a power factor of 0.8, we can use the formula for power factor: ( \text{p.f.} = \frac{R}{Z} ), where ( R ) is the resistance and ( Z ) is the impedance. Rearranging gives ( R = \text{p.f.} \times Z ). Thus, ( R = 0.8 \times 50 , \text{ohms} = 40 , \text{ohms} ). Therefore, the resistance of the coil is 40 ohms.
u find the toaster in the kitchen next to the fridge
Ohms can be found by using these formulas. Ohms = Volts/Amps, Ohms = (Volts (squared))/Watts, Ohms = Watts/(Amps (squared)).
To find the conductance using ohms law,you take the inverse of the resistance(/R)
Find out the ohms range it must be within and do an ohms test.
Yes black n decker did but can't find it on market anymore! The best toaster we ever had!
there is no such thing as an efficient toaster so there can't be a lower efficient toaster.
The Brave Little Toaster : Japanese ~ see related link below .
Use the equation that shows the relationship between ohms and the properties that are known.
You wil find the most versatile settings with a digital toaster oven. One of the best digital toaster ovens available is the Krups FBC2 Digital 6 Slice Toaster Oven
To calculate the resistance in ohms, you also need to know the voltage. The formula to find the resistance in ohms is R = V^2 / P, where R is the resistance in ohms, V is the voltage, and P is the power in watts.
You can find the Hamilton Beach toaster in a variety of colors, including red.
the kitchen is a main place to find convection you can find it in the oven in the toaster and in the microwave