0
What else can I help you with?
Why does Jim use dc supply in oscillator circuits?
Jim use dc supply in oscillator circuits to and ac out put.
Which oscillator circuit uses a tapped coil in the tuned circuit?
Several oscillator designs use a tapped coil in the tuned circuit. The most common is the Hartley oscillator.
Why we don't use triac in case of ac controlled rectfier rather than scr?
A TRIAC does not have a symmetrical turn-on point in the opposite quadrant. This will introduce a DC bias, which you probably don't want. You can use an SCR, and then add diodes to allow it to operate in the opposite quadrant, or you can use two SCR's. Alternatively, you can use a DIAC in the TRIAC's gate circuit to balance the turn on point.
What is the basic function of the SCR's gate electrode?
The SCR's gate electrode is used to turn the SCR on, i.e. fire it.
What is the difference between crystal and local oscillator?
oscillator frequency is different.crystal working piezo electric effect
What is the major disadvantage of a free-running oscillator used to trigger an SCR or TRIAC?
One major disadvantage of a free-running oscillator is that it may not synchronize properly with the AC line frequency, causing timing errors and potential malfunction of the SCR or TRIAC. This can lead to inefficiencies and erratic behavior in the circuit.
Why does Jim use dc supply in oscillator circuits?
Jim use dc supply in oscillator circuits to and ac out put.
How do you use scr as a diode?
scr is basically a three terminal device can be used as diode by leaving one terminal
Why you use capacitors with crystal oscillator?
To increase the efficiency. Comparison between crystal oscillator and ceramic resonator.
What is the use of reflex klystron oscillator?
radar transmitters UHF TV transmission
Which oscillator circuit uses a tapped coil in the tuned circuit?
Several oscillator designs use a tapped coil in the tuned circuit. The most common is the Hartley oscillator.
What is SCR Give its application?
scr is a silicon control rectifier used to control the rectifing voltage.. its a bidirectional device can use it for both the directions......
When An SCR conducts appreciable current?
And SCR will conduct appreciable current when it is gated "on" and thus "told" to conduct. A silicon controlled rectifier(SCR) is an electronically controlled DC switch, and the gate is the terminal to which the control voltage is applied. Use the link below to learn more.
What is type of oscillations?
Phase-shift oscillator Armstrong oscillator Cross-coupled LC oscillator RC oscillator
Why we don't use triac in case of ac controlled rectfier rather than scr?
A TRIAC does not have a symmetrical turn-on point in the opposite quadrant. This will introduce a DC bias, which you probably don't want. You can use an SCR, and then add diodes to allow it to operate in the opposite quadrant, or you can use two SCR's. Alternatively, you can use a DIAC in the TRIAC's gate circuit to balance the turn on point.
Why SCR is not called GCR?
because it is gcr not scr
What is the basic function of the SCR's gate electrode?
The SCR's gate electrode is used to turn the SCR on, i.e. fire it.
