0
What else can I help you with?
What term is used for the top level of pipe in engineering?
Head loss
What is the thing that holds thread called?
A bobbin or a Spool
How do you make a simple and easy pulley?
To make a pulley, get a coat hanger. Cut the bottom of the hanger, and insert the open ends into an empty wooden spool. Adjust wire so spool turns easily, and then bend the ends so that the spool won't fall off. Hang rope on the spool. Attach one end of rope to a bucket or can. To use, hang the pulley and pull on the end with no bucket or can.
What is spool type flow divider?
A device for dividing the flow into the valve between two outlets. The spool is pressure balanced by the flow across it. When a greater pressure drop occurse at one of the ports the spool moves across to counteract this and divert more flow to one side. They are not perfectly accurate.
Where did the term spring line for pipe come from?
The term "spring line" for pipe refers to the horizontal line that marks the point where a pipe is neither fully submerged nor fully above water in a fluid system, typically in a trench or a cut. It is derived from the concept of "spring," indicating the natural level of groundwater or liquid that exerts pressure on the pipe. The spring line is crucial for assessing buoyancy and structural integrity, as it represents the transition zone where hydrostatic pressure impacts the pipe. Understanding this line helps engineers design and install piping systems effectively.
What is a pipe spool?
A pipe spool refers to a prefabricated section of a piping system. This includes the pipe, fittings and flanges that are pre-assembled. They are pre assembled because this can be done in a controlled environment.
What is the take off for a six pipe spool?
6"
What is a pipe spool drawing?
A pipe spool drawing is a drawing made specifically for plumbers. It is a drawing that helps them to see the intricate network of the pipes so that they can better fix them.
What is pipe spool drawing?
A pipe spool drawing is a drawing made specifically for plumbers. It is a drawing that helps them to see the intricate network of the pipes so that they can better fix them.
What is pipe spooling?
The term "pipe spool" or "spool piece" refers to a prefabricated section of a piping system that includes the pipe, fittings and flanges that are pre-assembled in the fabrication facility and then transported to the field. The reason for pre-assembly is that hoists, gauges, material and tools are available for the assembly in a controlled environment. The size of the spool pieces is limited by factors related to transportation to the site and ability to handle the spool piece at the site during assembly.
Why do some experts consider the term spool a backronym?
The term SPOOL was used simply because of it's function. Later on, the acronym was added to it. Thus, SPOOL is a backronym - as the acronym was added to merely fit the already-used term.
What is an FSM spool?
Field Signature Method spool piece. It is a system for monitoring changes in the pipe wall over a relatively large area of subsea pipe. It is used to detect, monitor and ensure control of corrosion in pipelines.
Definition of cast iron double flanged pipe?
Sometimes it is called a Dutchman or spool piece depending on which trade is using it as welders would call it spool
What type of document is used for pipe shop assembly?
Detail drawing
Where did the term derby originate?
Where did the term derby originate?
Where did the term Pogrom originate during the holocaust?
The term Pogrom did not originate during the Holocaust.
Where did the words roan pipe originate from?
A roan pipe is the drain pipe leading down from the gutter, also known as a gutter pipe. As far as I know it is of Scottish origin.
