0
What else can I help you with?
What are the two kinds of walls that hold up roofs of frame structures?
load bearing
What is the peak load of a power supply?
A: A power supply when designed it will have some nominal criteria and also some maximum output power available which reflect to the peak load that it can stand without burning up
What is Load-bearing?
Load Bearing - something that bears a load. Like a load bearing wall in a house. The wall is holding something up like the roof, another floor, etc.
Can you top up a transformer on load?
You will have to restate your question. What do you mean by 'top up'?
What is no load tap changing in transformer?
It changes the tap while it is operation (hence "on load"). This allows real-time voltage regulation for the transformer secondary (as load picks up, causing the voltage to sag, the LTC can tap up, increasing the voltage).
What are the two kinds of walls that hold up roofs of frame structures?
load bearing
How do structures stand up?
Structures stand up primarily due to the balance of forces acting upon them, including gravity, tension, compression, and shear. Materials used in construction, such as steel and concrete, are selected for their strength and stability to withstand these forces. The design of a structure, including its shape and load distribution, also plays a crucial role in ensuring that it can support its weight and the loads it encounters. Additionally, foundations provide stability by anchoring structures to the ground, preventing settlement or tipping.
What 'safe working load' term when applied to axle stands?
the safe working load is the load the stand can support safely without failure. It Is called safe because it can generally stand up to five times the safe load but one should not intentionally exceed the safe load. Safe load is also called working load or rated load
What does it mean when the car engine is under load?
when it is under load it means that more and more is being demanded from the engine, be it from speeding up or turning on all auxillaries
What is the recommended way to approach a stack to place or pick up a load?
When placing a load on a stack, approach slowly and line up the forks with the load. Lower the forks to the correct height, then drive forward until the load is against the stack. When picking up a load, ensure the forks are positioned evenly under the load, lift it slowly and steadily, then back up carefully to clear the area.
1994 explorer pings under load check engine light is on under load Is this a sensor problem how do you read the computer codes?
Try going up one grade in fuel octane
What is the peak load of a power supply?
A: A power supply when designed it will have some nominal criteria and also some maximum output power available which reflect to the peak load that it can stand without burning up
How do you load a Remington 22 cal 550?
in the loading tub bullet tip up under the barrel.
Can you dig up?
In "Dig Dug", yes. In some other underground games (e.g. Mother Load), no. Digging "up" requires that you stand "on nothing" while doing so.
How do you load a Remington 22 cal 550-1?
in the loading tub bullet tip up under the barrel.
Your F150 has no power under load?
Check to see that your catalytic converter is not full. Otherwise get your engine tuned up.
What is the law for a under 50cc motor scooter in Ga?
under 50cc (STAND UP SCOOTER) is street legal with a drivers permit
