0
What else can I help you with?
What is the negatively charged electrode of a cathode ray tube?
The negatively charged electrode of a cathode ray tube (CRT) is the cathode. The tube is a cathode ray tube, and electrons stream off the cathode, are accelerated across the evacuated space and "directed" either electromagnetically or electrostatically, and then strike the phosphor coating on the positively charged anode at a "location" determined by the "directing" elements.
Which scientist used the cathode ray tube to isolate the electron in 1897?
J.J. Thomson used the cathode ray. Thomson's cathode ray experiment was when he shot a narrow beam of electrons through a cylindrical tube and deflected the electrons off of electric and magnetic fields, thus measuring the effects that those fields had on the direction of the beam.
How heavy is the cathode ray tube?
Could you please explain your question more fully?Is it the last part of a longer question?There are many types and sizes of cathode ray tubes, which weigh different amounts.RegardsGeorge
How was the Cathode Ray Tube Amusement device invented?
Cathode ray tube amusement device was created in 1947.
Why deflection is necessary in cathode ray tube?
It is not necessary in a cathode ray tube, it is a side effect and is needed in the calculations to ensure that there are no errors.
What is the flow of a cathode ray inside a cathode ray tube?
Electrons.
What is the direction of current in picture tube of TV?
A cathode ray tube (CRT) emits light when electrons strike the front of the glass tube that is covered in a phosphor coating. The front of the tube is the anode of the tube. The electrons are fired from the rear of the tube by an electrode called the cathode. The electrons are formed into a beam or ray, hence the name of cathode ray tube. Although the electrons travel from the rear of the tube to the front, or from the cathode to the anode, conventional current actually flows the opposite direction. So, the current, as measured in amps will flow from the anode to the cathode.
How does cathode rays ionise the gas which is filled inside a distarge tube?
i did not get arelavent answer
What following piece of equipment was used by jj Thomson to find electrons?
J.J. Thomson used a cathode ray tube to discover electrons. By passing an electric current through the tube, he observed the deflection of a beam of electrons, which led to his conclusion about the existence of electrons.
In a cathode ray tube where do the particles originate towards what Do they move?
The particles originate from the Cathode in the neck of the tube. They are liberated by a heater. The electrons thus liberated are attracted by the Anode, by applying a high voltage to it. In a CRT there are several anodes, the largest and biggest is formed by a coating inside the tube towards the screen. This attracts and accelerates the electrons in a stream of particles known as a 'cathode ray'. They carry on in a straight line, once accelerated, until they hit the screen and cause a phosphor coating to glow, on the inside surface of the screen. The cathode ray can be bent from it's course, by using electromagnets arranged around the neck of the tube.
Why does a cathode ray tube have low pressure inside?
Low pressure inside a cathode ray tube? How about nopressure inside the tube! In a cathode ray tube, the "cathode ray" is an electron beam that is used to paint a "picture" on the phosphor coating on the inside of the tube. (We look at the "picture" from the other side of the glass on which the coating is laid down - the outside.) An electron is a lightweight little dude. It weighs about 1/1836th as much as a single proton, so anything, any gas atoms that are in the flight path of an electron will cause it to scatter. That means we need to pump all the air out of the inside of the tube. After we remove all we can, we fire a "getter" (a chemical coated onto a small area inside the tube) which will bind any remaining gas molecules left inside the tube to complete the evacuation process. No more pesky atoms to get in the path of the electron beam and scatter it all over the place.
What is the negatively charged electrode of a cathode ray tube?
The negatively charged electrode of a cathode ray tube (CRT) is the cathode. The tube is a cathode ray tube, and electrons stream off the cathode, are accelerated across the evacuated space and "directed" either electromagnetically or electrostatically, and then strike the phosphor coating on the positively charged anode at a "location" determined by the "directing" elements.
What is the full meaning of CRT in computer?
A "CRT" is a cathode ray tube. An old style computer monitor (not computer).
What is a crookes tube?
A Crookes tube is a type of cathode ray tube that was used for scientific experiments and demonstrations in the late 19th century. It consists of a partially evacuated glass tube with electrodes that generate a beam of electrons. This device played a pivotal role in the discovery of cathode rays and led to the development of modern television and computer displays.
Why television are also known as cathode ray tube?
because cathode ray tube is the heart of the television.
Who first invented the cathode ray tube?
The cathode ray tube was invented in 1897 by Ferdinand Braun.
Is cathode ray tube and electron tube same?
Yes they are the same. A cathode ray tube (CRT) uses an electron gun to "shoot" electrons from the cathode to specific positions on the anode of the CRT.
