To calculate the weight of a given amount of steel in the metric system you simply multiply the volume of steel in cubic meters times the SG of steel (typically 7.85 but it varies slightly depending on the type of steel). The answer will be in metric tonnes or MT.
Formula for steel bar weight per meter = D2/162 where D is diameter of bar
Calculate the length of steel you are going to use the building and muliply the length with unit weight of the steel.ex: 12 m 25mm steel weight is12 x 3.85 =46.2 kg3.85 kg/m is the unit weight of 25mm bar
You need to specify the wall thickness in order to calculate the weight.
kg = 6.16546 x width mm x OD2 x bore2 ---- 1000000
to calculate the weight of diffrent dia bars is d2/162 D=dia of bar , and multiply into 2 times then divide it by 162
To calculate the weight of steel without using a steel table book, you can use the formula: Weight = Volume x Density. First, calculate the volume of the steel by multiplying the length, width, and height. Then, multiply the volume by the density of the specific type of steel being used.
measure it
To calculate the weight of EN-24 steel, you need to know the volume of the steel and its density. The formula to calculate weight is Weight = Volume x Density. The density of EN-24 steel is around 7.85 grams per cubic centimeter.
by the ton
To calculate the weight of a steel round, you can use the formula: weight = volume * density. The factor needed would be the density of steel, which is typically around 7850 kg/m³. By knowing the density and the volume of the steel round, you can easily calculate its weight.
The weight of 4140 steel varies depending on the form and dimensions of the material. On average, the density of 4140 steel is around 0.283 lb/in³. Therefore, to calculate the weight of a specific piece of 4140 steel, you would need to know its dimensions and then use the density to calculate the weight.
by using calculator
To calculate the input weight for steel forging, you would first need to determine the volume of the final desired shape or part. You can then calculate the weight of the steel needed based on the density of the specific type of steel you are using and the volume of the final product. The formula to calculate weight is: weight = volume x density.
The most practical way to calculate this would be to simply weigh the ball, using weighing scales. If the ball is likely to roll off the scales, you can place it between objects to keep it in place. Then, subtract the weight of the objects from the total weight to find the weight of the iron ball.
To calculate the weight of structural steel, you can use the formula: weight = volume × density. First, calculate the volume of the steel by multiplying its length, width, and height. Then, multiply the volume by the density of the specific type of structural steel being used to determine the weight.
To calculate the number of iron atoms present in the stainless steel ball bearing, you first need to determine the mass of the ball bearing. This can be done by calculating the volume of the ball bearing using the radius provided. Once you have the volume, you can calculate the mass using the density. Then, you can determine the mass of iron in the ball bearing using the percentage of iron by weight. Finally, convert the mass of iron to the number of iron atoms using Avogadro's number.
16mm dia weight for running feet