answersLogoWhite

0

To conform a low compaction area of asphalt pavement, first, assess the extent of the deficiency and identify the cause, such as inadequate mixing or improper compaction techniques. Next, remove the affected section of asphalt, ensuring proper edges for bonding. Then, reapply a fresh layer of asphalt mix, ensuring correct temperature and compaction techniques to achieve the desired density. Finally, perform quality control checks to verify that the repair meets compaction specifications.

User Avatar

AnswerBot

2w ago

What else can I help you with?

Continue Learning about Engineering

What is the difference between flexible and rigid pavements?

Flexible pavement: Are those pavements which reflect the deformation of subgrade and the subsequent layers to the surface. Rigid pavement: The rigid characteristic of the pavement are associated with rigidity or flexural strength or slab action so the load is distributed over a wide area of subgrade soil.


Single lane asphalt road per km cost?

The exact cost to construct an asphalt road varies according to the conditions , terrain type , population of area etc. Cost is almost 8 million Euros for 1 km.


How road was constructed?

Road construction involves several key steps, starting with planning and design, which includes surveying the area and determining the route. Next, the ground is prepared by clearing vegetation, grading the land, and ensuring proper drainage. Materials such as gravel, asphalt, or concrete are then laid down in layers, followed by compaction to create a stable surface. Finally, finishing touches like signage, markings, and landscaping are added to complete the road.


Is it ok to have a fire pit over asphalt?

It's generally not recommended to have a fire pit directly over asphalt, as the heat can cause the asphalt to soften or become damaged. The intense heat can lead to melting, deformation, or even combustion of the asphalt, posing safety hazards. If you must use a fire pit in such an area, consider placing a protective barrier, like a heat-resistant mat or pavers, underneath it to prevent damage. Always ensure proper ventilation and safety measures are in place when using a fire pit.


What are the layers of material used to pave a parking area with asphalt concrete?

Paving a parking area with asphalt concrete typically involves several layers, including a subgrade layer, which is the natural soil compacted to provide a stable foundation. Above this, a subbase layer of granular material is often added for drainage and support. The base layer, made of crushed stone or gravel, provides additional strength, while the top layer consists of asphalt concrete, which is designed for durability and smoothness. Together, these layers ensure a well-structured and long-lasting parking surface.

Related Questions

What is an asphalt jungle?

An asphalt jungle is an idiomatic term for a city or urban area where the landscape is covered by pavement and the environment seems unsafe.


How much area does a yard of asphalt cover?

A yard of asphalt typically covers about 80 to 100 square feet at a thickness of 2 inches. The coverage can vary slightly depending on the specific type of asphalt and its compaction. For more accurate calculations, it's essential to consider the desired thickness of the asphalt layer.


How can I effectively perform asphalt pothole repair to ensure the longevity and durability of my pavement?

To effectively perform asphalt pothole repair for long-lasting results, follow these steps: Clean the pothole thoroughly, apply a tack coat, fill the hole with hot mix asphalt, compact the material, and seal the edges. Properly maintaining the repaired area will help ensure the longevity and durability of your pavement.


What is infrared paving?

Infrared paving is when you heat the existing ashalt to app.350 degrees then scarifie the heated asphalt, add a little fresh asphalt mix and power roll the area. I know Millennium Maintenance and Power Sweeping in Medford Ma. does this kind of work.


How many Square feet does 1 ton of asphalt cover?

This depends on many factors like the area of the pavement being covered and the thickness of the pavement. This question is very general and can have many answers. Here are some conversions to help figure out how many sq ft 1 ton of asphalt cover. 0.056 tons asphalt/ SY (1 in thick) and 9 sf/1 SY. using these conversions will yield an answer of 1 ton of asphalt (1 in thick) coverinig 160.7 sf


What means pavement in American English?

In American English, "pavement" typically refers to the hard surface of a road or path, usually made of asphalt or concrete, designed for vehicles and pedestrians. It can also refer to the area alongside a road where people walk, commonly known as a sidewalk. The term may vary regionally, as in some places, "pavement" may also refer to the entire surface of a street.


Where can I find asphalt pavers in my area?

Check the phone book first, then do a search online for asphalt paving + your area. Try this site for asphalt pavers: http://www.b2byellowpages.com/directory/b2b_company_b2b_companies/asphalt-paving-companies.shtml.


Do it yourself asphalt paving?

DIY asphalt paving can be a cost-effective way to create or repair driveways and surfaces, but it requires careful planning and proper equipment. Start by preparing the area, ensuring a solid base with proper drainage. Use a hot asphalt mix for the best results, and consider renting a roller for compaction. Safety is crucial, so wear protective gear and follow guidelines to achieve a durable finish.


Law in IL parking in a striped area next to a handicapped area that has a wheel chair logo on the area but no sign?

Striped area on the pavement means no parking. Ever. Vehicles are not supposed to be on that pavement. There is no requirement that there is a sign for handicapped parking, it must be clearly marked. And if it is painted on the pavement and it isn't covered with snow, there is no excuse.


How many square feet in a ton of asphalt?

The amount of square feet in a ton of asphalt will depend on the thickness of the asphalt. If the asphalt is three inches thick it will have to cover the area three times. The type of asphalt used is also a factor towards weight.


What do you call edge of pavement?

The edge of pavement is often referred to as the shoulder of the road. This area typically runs along the side of the pavement and provides a buffer between the road surface and surrounding terrain.


Asphalt Paving ?

form_title= Asphalt Paving form_header= Install asphalt in your home. Where are you installing asphalt?*= _ [50] Is there a certain design that needs to be paved?*= _ [50] What are the dimensions?*= _ [50]