You should be able to use it as is (assuming the plug matches your outlet). It will just run a little bit cooler at 220 volts vs. 230 volts.
The single phase voltage in India is 230v when we check with the phase and the nutral single line
415V 3 phase is the line to line voltage. The line to neutral of this supply is 230V single phase. Therefore you use one of the phases and the neutral.
The current is the same in the three live wires. The voltage can be described as the line voltage (phase to neutral) or the phase voltage (phase to phase) which is larger by a factor of sqrt(3). So a line voltage of 230 v corresponds to a phase voltage of 400 v.
Divide by your number of phases 1 or 3 then divide by your Voltage. If its a 3 phase supply Voltage you need to divide by your 3 phase voltage for balanced loads and by your single phase voltage for unbalanced loads requiring a neutral.
235.6 volts.
The single phase voltage in India is 230v when we check with the phase and the nutral single line
415V 3 phase is the line to line voltage. The line to neutral of this supply is 230V single phase. Therefore you use one of the phases and the neutral.
The current is the same in the three live wires. The voltage can be described as the line voltage (phase to neutral) or the phase voltage (phase to phase) which is larger by a factor of sqrt(3). So a line voltage of 230 v corresponds to a phase voltage of 400 v.
Ac voltage
The standard nominal voltage in Canada for a single-phase residential supply is 240/120-V split-phase supply.
A single-phase supply is obtained between any two line conductors or between a line and neutral conductor of a three-phase supply. To obtain a three-phase supply from a single-phase source is far more difficult, and requires additional equipment.
Three-phase voltage in Germany is 400V, single-phase voltage is 230V.
The maximum voltage capacity of a 240V single pole breaker is 240 volts.
Divide by your number of phases 1 or 3 then divide by your Voltage. If its a 3 phase supply Voltage you need to divide by your 3 phase voltage for balanced loads and by your single phase voltage for unbalanced loads requiring a neutral.
If a single-phase device is connected to a phase-to-phase voltage, the device may get damaged due to the higher voltage applied. Single-phase devices are designed to operate at a lower voltage compared to phase-to-phase voltage levels typically found in three-phase systems. It is important to match the voltage ratings of the device with the supply voltage to prevent damage.
235.6 volts.
The single phase voltage in India is 230v when we check with the phase and the nutral single line