You must rephrase your question to make it more specific.
<<>>
The formula to use to find KVA in a three phase system is, KVA = Amps x Volts x 1.73/1000.
If all three legs of the system are balanced then zero amps will flow all the way up to 100 amps if only one leg of the three phase system is used. The neutral in a wye three phase system carries only the unbalanced current. This is why in services for a three phase four wire system you are allowed to reduce the size of the neutral conductor.
50 Amps Single Phase 20 Amps Three Phase
Va=volts x amps. The K stands for one thousand. So 1 Kva is one thousand watts. So 415v times 120a= 49,800 what's. You divide that by a thousand and you get 49.8. So it would be 49.8 Kva.
To answer this question a voltage needs to be stated and whether the load is three phase or single phase. Without the voltage the amperage can not be calculated. For single phase, Amps = kva x 1000/voltage, for three phase, Amps = kva x 1000/1.73 x voltage.
You have to know the power loading and phase angle (or power factor) between each pairh of the phases, otherwise you could be making serious errors.
Amperes when kva is shown. The formula is, Amps = kva x 1000/1.73 x volts.
To convert from kilowatts (kW) to amps in a 3-phase system, you can use the formula: Amps = (kW × 1000) / (√3 × volts). In this case, with 42 kW and a voltage of 120208 V, the amperage would be around 139 amps.
If all three legs of the system are balanced then zero amps will flow all the way up to 100 amps if only one leg of the three phase system is used. The neutral in a wye three phase system carries only the unbalanced current. This is why in services for a three phase four wire system you are allowed to reduce the size of the neutral conductor.
To convert amps to kilowatt-hours (kWh) for a three-phase system, you need to know the voltage. The formula for three-phase power is: Power (kW) = sqrt(3) x Voltage (V) x Current (A) x Power Factor. Once you have the kW, you can convert to kWh by multiplying by the number of hours the equipment operates.
Single-phase, 2.5 amps; three-phase 1.443 amps.
50 Amps Single Phase 20 Amps Three Phase
A kw (kilowatt) is 1000 amps x volts. If you assume your one phase system has 120 volts, then divide by 120. Cheap, but close enough for most work, assume 100 volts, then each amp is a tenth of a kilowatt.
In a three-phase 225 amp panelboard, each phase will carry 225 amps. This means that the total current flowing through the panelboard is distributed evenly across the three phases, allowing for a maximum of 225 amps on each phase at a time.
To convert from kilowatts (kW) to amps in a 3-phase system, we need to know the system voltage. Using the formula: Amps = (kW x 1000) / (√3 x Volts), where √3 is the square root of 3. Assuming a system voltage of 120/208V, the amperage would be approximately 135.1 amps.
In a three phase 225 amp panel, there would be a total of 225 amps available for each phase, making it a total of 675 amps for all three phases combined. This means that you could have up to 225 amps of current flowing through each phase simultaneously.
In a three-phase system, the total load is the sum of the currents in each of the three phases. This is due to the balanced nature of three-phase systems, where the currents in each phase are equal in magnitude but shifted by 120 degrees. The full load of X Amps is the total current drawn by the load across all three phases.
In a standard 3 phase system in North America, 7kVa would be equivalent to 19.5 amps on each phase. The equation is: 7kva*1000/208v/1.73=19.45 amps (3 phase)