Of course, but it will change all parameters (HP, torque etc.) The problem is someone would have to redesign of that motor, size of coils in field winding according to new voltage, speed and HP ratings. Basically, is not worth it.
Single phase can't be turned into 3-phase by any reasonable means. But on the other hand resistance heating is fairly straight forward. If only the fuse rating is high enough it might be possible to rewire a 3-phase heater to run from a single-phase source.
To terminate a 3 wire wye motor to a 3 phase delta connection you need a 3 phase transformer to convert from delta to wye. Do not lift the common neutral connections inside the motor and rewire for delta, because the voltages will be wrong.
The difference between a single phase and a three phase motor is the amount of power conductors that feed the device. As to the other part of the question a three phase motor will not start or run on single phase. The phase angles on three phase are 120 degrees apart on a single phase system they are 180 degrees apart.
Houses generally run on single phase power. It would not make sense to convert single phase to three phase to run a house. Please restate the question.
Drawing block diagram of single phase capasitor start motor?
The winding design of the motor will not economically allow this to work. You would have to drive a 3 phase generator to supply it.
The motor cannot be altered to work on single phase power. You will either have to put in a new single phase motor or use a phase convertor box. Do a google search for phase convertor - you will find plenty.
Single phase can't be turned into 3-phase by any reasonable means. But on the other hand resistance heating is fairly straight forward. If only the fuse rating is high enough it might be possible to rewire a 3-phase heater to run from a single-phase source.
To use a single/one phase motor instead of a three phase motor is possible if you have a three phase power supply as you will only need to tap one of the three phases together with neutral and an earthwire, however to use a three phase motor instead of a single phase will require the provision of three phase power supply.
To terminate a 3 wire wye motor to a 3 phase delta connection you need a 3 phase transformer to convert from delta to wye. Do not lift the common neutral connections inside the motor and rewire for delta, because the voltages will be wrong.
Single phase motor winding is often checked just by listening to the noise that the motor is making. An experienced person can tell if the motor is working at single phase or double phase.
No. That would be a single phase motor.
The difference between a single phase and a three phase motor is the amount of power conductors that feed the device. As to the other part of the question a three phase motor will not start or run on single phase. The phase angles on three phase are 120 degrees apart on a single phase system they are 180 degrees apart.
fan is a capacitor start capacitor run single phase induction motor. since single phase induction motors are not self starters, caused by discontinuty in stator mmf. so to iniate rotation single phase supply is splitted 90 degree apart by a capacitor to convert it to a 2 phase motor, which produces a continued synchronously revolving mmf in stator to start the motor. cool !!
No, a single phase motor cannot be directly connected to a three phase soft start. A single phase motor requires a single phase power supply, while a three phase soft start is designed for three phase motors. Using the correct soft start for the motor type is essential for proper operation and protection of the equipment.
By having a transformer with 3 phase input and single phase out put
I dont know if you can actually convert the oven's wiring from 3-phase to single phase. You can, however, convert the single phase circuit that will feed the oven to a 3-phase system. To this you will need a phase converter. Now, where to purchase such an item, and how much they cost? i have no idea.