0
The Pascal unit is a pressure unit equivalent to a (kg s-2 m-1).
The pressure for inches of oil is calculated using the equation P = h * rho * g, where rho is the density, g the gravitational constant and h the height (in this case, inches of oil). The density of a substance is calculated as the specific gravity of that substance times the density of water at that temperature.
Therefore, to convert Pascals to inches of oil,
1 inch of oil (Pressure) = 1 in. x (0.0254 m / 1 in.) x 0.89*1000 kg/m3 x 9.81 m/s2 = 221.8 kg s-2 m-1 = 221.8 Pa
or multiply Pascals by 4.509 x 10-3 to get inches of oil with a SG of 0.89
What else can I help you with?
How do I write a program that inputs the length of two pieces of fabric in feet and inches as whole numbers and prints the total?
#include <stdio.h> int main (void) { unsigned f1, i1, f2, i2; scanf ("Enter the 1st length in feet and inches: %u%u", f1, i1); scanf ("Enter the 2nd length in feet and inches: %u%u", f2, i2); unsigned inches = i1 + i2 + (12 * (f1 + f2)); // sum the inches (convert feet to inches) unsigned feet = inches / 12; // convert inches to feet inches %= 12; // determine the remaining inches printf ("The total length is %u feet %u inches.\n", feet, inches); return 0; }
To convert 145 gpm at 20 ft head to psi?
20 ft of head can be easily converted to psi by using the specific weight of water: 62.4 lb/ft3 and converting the units to inches. 20ft * 62.4lb/ft3 / 144in2/ft2 = 8.67 psi
What size drill bit is .376?
A drill bit size of .376 inches is equivalent to a 3/8 inch drill bit, which is slightly smaller than 3/8 inch (0.375 inches) and larger than 13/32 inch (0.40625 inches). In metric terms, this is approximately 9.55 mm. It’s important to choose the right drill bit size based on the specific requirements of your project.
How much liquid volume in ten feet of 12 inch copper pipe?
There are 231 Cubic inches in One U.S. Gallon. Assuming your pipe has an ID of 12" a 10 foot length has 13564.8 Cubic inches. To calculate this you must first calculate the area of the 12" circle and then multiply it by the length (in inches) It would look like this: Area = Pie x radius squared. The radius is 1/2 the diameter or 6" Sooo.... Area = 3.14 x 36 which comes to 113.04 square inches. Volume = Area x length Volume = 113.04 x 120" which is 13561.8 cubic inches to convert to gallons simply divide 13561.8 by 231 = 58.72 gallons. Hope that helps Scott
How much sand and cement you need for 2000 bricks?
To calculate the amount of sand and cement needed for 2000 bricks, you first need to determine the volume of one brick. Assuming a standard brick size of 8 inches by 4 inches by 2 inches, the volume of one brick is 64 cubic inches. For 2000 bricks, the total volume would be 128,000 cubic inches. To convert this volume to cubic feet (since sand and cement are typically measured in cubic feet), you would divide by 1728 (12x12x12). This gives you approximately 74.07 cubic feet of sand and cement needed for 2000 bricks.
How do you convert inches of Mercury to pascals?
To convert inches of Mercury to pascals, use the conversion factor 1 inHg = 3386.39 Pa. Multiply the value in inches of Mercury by this conversion factor to get the equivalent value in pascals.
How do you convert inches into specific gravity?
You cannot. An inch is a measure of length in 1-dimensional space while specific gravity is the ration of the density of a substance compared to that of water. Specific gravity is a pure ratio - it has no units. The two measure different things and, according to basic principles of dimensional analysis, any attempt at conversion from one to the other is fundamentally flawed.
What is specific gravity of portland pozzolona cement?
The specific gravity of portland pozzolana cement is 3.15.The specific gravity test can be done on cement using the bottle method.In this method instead of water kerosene is used to test the specific gravity of cement.
How much inches are in a pound?
Inches and pounds are units of different physical quantities, so they cannot be directly converted into one another. Inches are a unit of length or distance, while pounds are a unit of mass or weight. To convert between the two, you would need to know the density or specific gravity of the material in question.
What is the conversion factor of the metric system?
Depends, what you want to convert to what. To convert between different metric units, powers of 10 are used. For example, a kilometer is 1000 meters. To convert from metric units to imperial units, you have to ask specific questions for specific units, for example, "how to convert inches to meters", or "how to convert pounds to kilograms".Depends, what you want to convert to what. To convert between different metric units, powers of 10 are used. For example, a kilometer is 1000 meters. To convert from metric units to imperial units, you have to ask specific questions for specific units, for example, "how to convert inches to meters", or "how to convert pounds to kilograms".Depends, what you want to convert to what. To convert between different metric units, powers of 10 are used. For example, a kilometer is 1000 meters. To convert from metric units to imperial units, you have to ask specific questions for specific units, for example, "how to convert inches to meters", or "how to convert pounds to kilograms".Depends, what you want to convert to what. To convert between different metric units, powers of 10 are used. For example, a kilometer is 1000 meters. To convert from metric units to imperial units, you have to ask specific questions for specific units, for example, "how to convert inches to meters", or "how to convert pounds to kilograms".
What are 5.7cm or 2.25 inches?
To convert inches to centimeters, multiply by 2.54. To convert from centimeters to inches, divide by the same factor.To convert inches to centimeters, multiply by 2.54. To convert from centimeters to inches, divide by the same factor.To convert inches to centimeters, multiply by 2.54. To convert from centimeters to inches, divide by the same factor.To convert inches to centimeters, multiply by 2.54. To convert from centimeters to inches, divide by the same factor.
How to Convert 1.96 into inches?
how do you convert 1.96 into inches
Can you convert 4.2cm into inches?
convert 4.2 cm to inches
How do you convert square inches to inches?
You cannot convert square inches to inches. Square inches are units used to measure area and inches are units of length. You cannot convert one to the other.
How do you convert cubic inches to inches?
You cannot convert cubic inches to inches. Cubic inches are units of volume and inches are units of length.
Convert 5 feet 6 inches into inches squared?
convert 5 feet 6 inches into inches
What is 246 cm into feet and inches?
To convert cm to inches, divide by 2.54. After that you can convert inches to feet and inches.
