First you need the size of the pipe and the volume of water supply. Pressure will vary during usage. Standard well system operates between 20-40 psi and city systems operate from 50-70 psi.
About 1.25 gallons per minute.
50GPM
When operating, a nuclear power plant needs about 750,000 gallons of water per minute! When being shut down (as in the case of an emergency) the cooling operation requires about 25,000 gallons per minute.
The amount of water that flows through a pipe depends on several factors, including the pipe's diameter, length, material, the pressure of the water supply, and the flow rate. The flow rate is typically measured in liters per minute (L/min) or gallons per minute (GPM). To calculate the exact volume, you would need specific details about the pipe and the conditions of the water flow.
97.968 kPag
No it increases them.
The GPM (gallons per minute) of water flow for a pressure washer typically ranges from 1.5 to 4 GPM, depending on the model and size of the machine.
The answer is unknown. In order to answer this question you need to know the pressure of the water.
The GPM rating on a pressure washer refers to the gallons of water it can spray per minute. This rating indicates the machine's water flow capacity, which is important for determining its cleaning power and efficiency.
The amount of water flowing by the gallon per minute affects water pressure in a way that means the higher the volume of water per minute, the higher the pressure the water will be. There is also the factor of air in the pipes that will slow down water pressure significantly.
50 gallons of water per minute equals 3,000 gallons per hour.
An average kitchen faucet uses approximately three to five gallons of water per minute. The average person uses around 50-gallons of water every day.Ê
It depends on how long a person spends washing their car. When using a self-service car wash with high pressure hoses, the amount of water used is about 3.5 gallons per minute. Washing a car without high pressure hoses uses about 8 gallons per minute.
you need to know the density of the material that is flowing. 1 liter per minute of water times 999 kg/cu. meter equals .017 kg/s water.
About 1.25 gallons per minute.
50/(24*60)=0.0347GPM
About 500,000 gallons of water