0
What else can I help you with?
Why earth cable used along with the 11kV power cable?
If you are referring to an 11-kV underground cable, these are normally armoured and, in the case of older cables, have a lead sheath to prevent moisture ingress into the cable. The lead sheath and metal armour are earthed to ensure that, in the event of mechanical damage to the cable, there is a low-resistance path back to the source to sufficient earth-fault current flows in order to operate the circuit's protective system. Overhead lines do not normally have a separate earth conductor.
What is the maximum capacity of 11kv transformer?
It depends on the design of the transformer but 1 MVA is a common size for an 11 kV / 415 v three-phase transformer.
What is the minimum value of Ir test in 11kv cables?
4444
Why the generating stations produce 11kv voltage and it step up to 33kv during transmission.. why we should not use 230volts to generated and can step up to 11kv.. why?
if we take 11kv /33kv yhe current produced will be less when compared to 230v/11kv.. the curent produced will be gerater than 1000amp or above so the winding of the transformers will damage because thier is no winding at present to with stand the huge amount of current by K.B.N.GANGADHAR sasi institute of technology and engineering
What is the base mva of 33Kv?
750MVA to 1000MVA for 33kV and 350MVA for 11kV
What is underground feeder cable?
It is a cable that feeds.
Why earth cable used along with the 11kV power cable?
If you are referring to an 11-kV underground cable, these are normally armoured and, in the case of older cables, have a lead sheath to prevent moisture ingress into the cable. The lead sheath and metal armour are earthed to ensure that, in the event of mechanical damage to the cable, there is a low-resistance path back to the source to sufficient earth-fault current flows in order to operate the circuit's protective system. Overhead lines do not normally have a separate earth conductor.
What type of armour cable to you need to run underground to your garage?
Armoured cable is not rated for underground installations. You have to use a cable with a designation for direct burial or wet and damp locations.
What is the best cable burying tool for burying cables underground efficiently and effectively?
The best cable burying tool for burying cables underground efficiently and effectively is a cable trencher.
What should be the distance between underground power cable and telephone cable?
300mm
What is the maximum capacity of 11kv transformer?
It depends on the design of the transformer but 1 MVA is a common size for an 11 kV / 415 v three-phase transformer.
What is URD cable and how is it used in electrical installations?
URD cable, or Underground Residential Distribution cable, is a type of electrical cable designed for use in underground power distribution systems. It is commonly used to deliver electricity from utility poles to residential and commercial buildings. URD cable is insulated to protect against moisture and other environmental factors, making it suitable for burial underground.
Service entrance cable underground feeder branch circuit cable mineral insulated cable jacketed cable?
These are different types of electrical cables used for various applications. Service entrance cable is used to connect the utility power to a building's main electrical panel. Underground feeder branch circuit cable is used for underground wiring between buildings or from the main panel to subpanels. Mineral insulated cable is a type of fire-resistant cable used in high-temperature environments. Jacketed cable refers to any cable with an outer protective covering for mechanical and environmental protection.
How much must be the distance between two conductors of 11kv line?
600mm is the distance between two conductors in 11kv line
How do cable companies get their TV signal?
Cable companies utilize satellite technology to initially get the signal, then it is distributed via underground or above ground cable.
What instrument you use to measure 11kv?
A digital voltmeter with a range up to 11kV would be suitable for measuring a voltage of 11kV. Ensure the voltmeter is rated for the high voltage to be measured and follow safety protocols when working with high voltage systems.
How do you locate underground cable fault?
Time Domain Reflectometers can be used to locate where an underground cable fault lies. Time Domain Reflectometry (See wikipedia) is a measurement technique to identify the location using reflected signals sent down the cable line.
