If the load is single equipment, calculating the capacity of the generator or transformer is fairly straight forward. If the load is mix of various several different equipment it would be more complicated to arrive at transformer / Generator capacity. Complexity increases if you have to estimate some future unknown loads.
The rating of the generator or transformer should be such that it is loaded optimally, average being say 80 to 95 %. Since maximum efficiency of generator or transformer generally occur at these range. Also this ensures that it is not overloaded continuously and there is room for occasional short time full load too. You need to check the data sheet of the transformer or generator for more correct information.
One need to know the maximum load or peak load, average load and diversity factor and load factor. These values drive the decision on the rating of the transformer or Generator.
Any transformer can be overloaded by applying a load above the capacity rating of the transformer.
the maximum power it will supply
Transformer capacity (kvA) shall be identical, Both transformer impedance, secondary voltage and frequency shall be identical.
It depends on the design of the transformer but 1 MVA is a common size for an 11 kV / 415 v three-phase transformer.
What's the maximum value power capacity of dry type
Depends on the transformer. This can range from a few gallons to thousands of gallons.
Any transformer can be overloaded by applying a load above the capacity rating of the transformer.
transformer action doesn't depend on power factor that is why we indicate its rating in KVA
the maximum power it will supply
Transformer capacity (kvA) shall be identical, Both transformer impedance, secondary voltage and frequency shall be identical.
It depends on the design of the transformer but 1 MVA is a common size for an 11 kV / 415 v three-phase transformer.
800 MVA
Yes, you can use a 1000 watts transformer with a 700 watts appliance. The transformer's capacity should be equal to or greater than the appliance's wattage to prevent overloading or damage. In this case, the 1000 watts transformer has enough capacity to safely power the 700 watts appliance.
What's the maximum value power capacity of dry type
Go to photograph if you see a transformer
Sounds like the wrong size fuse protection was used. The transformer should be protected to its kva capacity.
iT is above Transformer because The Two power Transformers are operaTed iT for The same shape buT cuT in half