answersLogoWhite

0

An oscillator is an electronic circuit that produces an electronic wave or signal. The oscillator signal is the signal the oscillator puts out. An oscillator can put out different frequencies and different types of waves depending on how it is designed. These signals have many different uses in electronics. For instance you can use it to convert DC (direct current) from a battery to 60 Hz AC (alternating current) to use in a home. Some oscillators are variable like what you have in your radio or TV for picking up different signals or stations. To produce an oscillator signal: if you know a lot about electronics you can build your own from parts you can get at some place like Radio Shack. Otherwise you can buy an oscillator. Radio Shack might have one or you might have to look on line. You also have to know what kind of wave and frequency you need to be sure and get an oscillator that produces that signal. If the signal you need is unusual you may need a variable oscillator.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

Does an oscillator have input?

Yes, an oscillator typically requires an input signal to generate its output waveform. The input signal could be a voltage or current signal that initiates and drives the oscillation process within the oscillator circuit.


What is difference between oscillator and regulator ic?

oscillator is which oscillates to a required proportion in order to generate signal with required frequency. whereas, regulator limits the signal to a predefined value and offers a constant out put through out


What is the difference between oscillator and multivibrators?

Oscillator is an electronic circuit which can generate oscillating sin signal without any oscillating input with use of positive feedback Multivibrator is a two stage RC coupled amplifier circuit which can generate squae signal without ac input


Can a radio receiver be located with a detector?

Yes, a radio receiver can be located with another receiver or tracer, most radio receivers is of the regenerative type and it has a local oscillator that is used to generate an intermediate (IF) signal of 465Khz on shortwave and 10.7Mhz on the higher frequencies like a FM or TV receiver, that oscillator is like a low power transmitter that is transmitting an un-modulated RF signal. Any nearby receiver can pick up this signal although no sound will be heard on the receiver, to be able to hear a signal the tracer is equipped with a BFO, (Beat Frequency Oscillator) that will generate an audible tone when a signal is received, the same way as the local oscillator generate the IF signal but only in the audible frequencies and a signal strength meter, then with a directional antenna, the receiver that is to be traced can be pin pointed.


What is function of an oscillator?

A local oscillator is an electronic device used to generate a signal normally for the purpose of converting a signal of interest to a different frequency using a mixer. This process of frequency conversion, also referred to as heterodyning, produces the sum and difference frequencies of the frequency of the local oscillator and frequency of the input signal of interest. These are the beat frequencies. Normally the beat frequency is associated with the lower sideband, the difference between the two.


What are the applications of colpitt's oscillator?

to generate the sinusodal waveform(to generate sustained oscillations)


What are the application of colpitt's oscillator?

to generate the sinusodal waveform(to generate sustained oscillations)


What is the oscillator?

The purpose of an oscillator is to produce repetitive sound that will compliment the music being played. They are relatively easy to set up and use. Oscillators will filter the sounds providing a wide range of music.


What what is an oscillator?

a circuit that produces a continuously oscillating signal.


What is an oscillator and what are its main components?

oscillator is an electronic device used to generate wave form by using the concept of feed back.


Why crystal oscillator used for microcontrollers?

Oscillators are connected externally with the microcontroller to provide high frequency signal to the oscillator circuit in the microcontroller. The oscillator circuit provides the clock signal to the micro controller. Usually "PIEZO CRYSTAL OSCILLATORS" are used in micro controllers.


What is an audio oscillator?

An electronic oscillator is an electronic circuit that produces a repetitive electronic signal, often a sine wave or a square wave.