0
What else can I help you with?
What are the importance of turbo c?
i came to know about that turbo c compiler is having 32 number of disadvantages........ i know about 10-12 disadvantages and i am sharing those wid u .... 1) Turbo c is a 16bit compiler ... means it can access about 16bits of data at a time... 2)Turbo c is based upon 8086 microprocessor... and it can run on x86family.... 3) Turbo c is derived from MS-DOS whereas GCC compiler which runs on linux..is a very good one as compared to Turbo C compiler..,.. 4)Also we cant do ODBC and Networking programming over the Turbo C comiler whereas we can do above programming in GCC compiler successfully by installing one ODBC library in it.... 5)we cant do graphics programming over here, rather we can do graphics programming. in GCC compiler using Glad Interface... 6) Turbo C compiler can access only 1mb of RAM, which is a demerit...whereas GCC compiler can access 4gb OF MEMORY.. 7) 7) Turbo C compiler is based upon MS DOS operating system.. which is a single process operating system..whereas GCC Compiler is based on 80386 processor(LINUX) and it is multiprocess operating system.....
How to excute c program on dos?
Command-line and IDE C compilers: There are two types of C compilers, each of which has advantages and disadvantages: (i) Command-line C compilers and (ii) IDE or Windows C compilers To compile and run a C program using a command-line C compiler, you have to go through the following steps: (i) Write the C program (call it ``myfile.c'') in a text editor or word processor (for example, the simple ``Hello'' program below), (ii) Save it as a file on your computer's hard disk, (iii) ``Compile it'' to a computer-executable program by entering a compile command at a command prompt, for example for the following C compiler programs: gcc -Wall -o myfile myfile.c (using the GNU C compiler, UNIX or Microsoft Windows) cl myfile.c (Microsoft Visual C++ command-line compiler) bcc32 myfile.c (Borland C/C++ compiler, Microsoft Windows) followed by the ``Enter'' key, and finally (iv) Run the program by entering myfile at a command prompt, again followed by ``Enter''. If you want to save the output of ``myfile'' as a text file ``myfile.txt'', enter instead myfile > myfile.txt
How to compile installed on your system?
To check which compilers are installed on your system, you can use the command line. For example, on Linux, you can type gcc --version for GCC or clang --version for Clang to see if they are installed. On Windows, you might check for Visual Studio's compiler by running cl in the Command Prompt. If a compiler is not installed, you can typically install it using your system's package manager (like apt for Ubuntu or brew for macOS).
Write a programme to perform binary operations on integer argument The arguments and operators should be accepted using command line parameters?
There are many different operators, which are you referring to?
How was the first compiler programmed?
The first compiler couldn't be compiled since there were obviously no compilers! It had to be assembled, using assembly language and an assembler. Once you have one compiler, you can easily write others. Today, most compilers are written using C++, including the C++ compiler itself (the original was written in C, of course).
What are the importance of turbo c?
i came to know about that turbo c compiler is having 32 number of disadvantages........ i know about 10-12 disadvantages and i am sharing those wid u .... 1) Turbo c is a 16bit compiler ... means it can access about 16bits of data at a time... 2)Turbo c is based upon 8086 microprocessor... and it can run on x86family.... 3) Turbo c is derived from MS-DOS whereas GCC compiler which runs on linux..is a very good one as compared to Turbo C compiler..,.. 4)Also we cant do ODBC and Networking programming over the Turbo C comiler whereas we can do above programming in GCC compiler successfully by installing one ODBC library in it.... 5)we cant do graphics programming over here, rather we can do graphics programming. in GCC compiler using Glad Interface... 6) Turbo C compiler can access only 1mb of RAM, which is a demerit...whereas GCC compiler can access 4gb OF MEMORY.. 7) 7) Turbo C compiler is based upon MS DOS operating system.. which is a single process operating system..whereas GCC Compiler is based on 80386 processor(LINUX) and it is multiprocess operating system.....
How to you use clear screen in turbo C?
by using "clrscr" command at starting of the program
What is the purpose of using echo command?
The echo command echoes out any of the command line arguments given to it. It is commonly used in shell scripts to echo what portions of the shell script are doing.
How do you compile and execute programs using command line in DOS?
ad1: install a compiler ad2: just enter the program's name at the prompt
How do you Compile the C Programs in command prompt?
That would depend on the compiler you were using and the file(s) you were trying to compile. Differen compilers would have different ways to run them, so you would need to know the commands for your particular compiler, if it is capable of running from the command prompt.
Are languages and compilers application softwares?
No. A compiler is a system software. An application can be created using a language and a compiler. A language is what you write the software with.No. A compiler is a system software. An application can be created using a language and a compiler. A language is what you write the software with.No. A compiler is a system software. An application can be created using a language and a compiler. A language is what you write the software with.No. A compiler is a system software. An application can be created using a language and a compiler. A language is what you write the software with.No. A compiler is a system software. An application can be created using a language and a compiler. A language is what you write the software with.No. A compiler is a system software. An application can be created using a language and a compiler. A language is what you write the software with.No. A compiler is a system software. An application can be created using a language and a compiler. A language is what you write the software with.No. A compiler is a system software. An application can be created using a language and a compiler. A language is what you write the software with.No. A compiler is a system software. An application can be created using a language and a compiler. A language is what you write the software with.No. A compiler is a system software. An application can be created using a language and a compiler. A language is what you write the software with.No. A compiler is a system software. An application can be created using a language and a compiler. A language is what you write the software with.
How do am pass arguments in public static void main?
By using command line arguments we can pass values to the static void main method at the time of running the Java class. For example: if Class name is A,then to run this class and accepts command line then run this by using below line java A <argument1> <argument2> ....
How do you read input of a programme from a text file using borland c compiler from command prompt?
Use functions like fopen, fclose, fgets, sscanf, strtok
How to excute c program on dos?
Command-line and IDE C compilers: There are two types of C compilers, each of which has advantages and disadvantages: (i) Command-line C compilers and (ii) IDE or Windows C compilers To compile and run a C program using a command-line C compiler, you have to go through the following steps: (i) Write the C program (call it ``myfile.c'') in a text editor or word processor (for example, the simple ``Hello'' program below), (ii) Save it as a file on your computer's hard disk, (iii) ``Compile it'' to a computer-executable program by entering a compile command at a command prompt, for example for the following C compiler programs: gcc -Wall -o myfile myfile.c (using the GNU C compiler, UNIX or Microsoft Windows) cl myfile.c (Microsoft Visual C++ command-line compiler) bcc32 myfile.c (Borland C/C++ compiler, Microsoft Windows) followed by the ``Enter'' key, and finally (iv) Run the program by entering myfile at a command prompt, again followed by ``Enter''. If you want to save the output of ``myfile'' as a text file ``myfile.txt'', enter instead myfile > myfile.txt
What are the strengths and waekness of using the turbo in making highly defined and efficient programming codes?
Turbo C is a 16 bit compiler, there are no 32 and 64 bit compilers. In its day turbo C was good, I learned to program with it. Today it has no strengths other than being free but there are also free 32 and 64 bit compilers.
How do you find command line arguments as integer in shell scripting?
In shell scripting, command line arguments can be accessed using the special variable $1, $2, etc., where $1 refers to the first argument, $2 to the second, and so on. To treat these arguments as integers, you can use arithmetic expansion with the (( )) syntax. For example, you can perform calculations like sum=$(( $1 + $2 )) to add the first two arguments. Ensure the arguments passed are valid integers to avoid errors during arithmetic operations.
What command should be given to run a C program from the DOS prompt?
This depends on what compiler you're using, but they all generally have the same process. Example: Converts source code stored in the file test.c into an executable program in test.exe using the GCC compiler... gcc -o test.exe test.c To run the program you can now just run test.exe.
