0
What else can I help you with?
Where is the place of main bar in rectangular footing?
in a rectangular foundation long bars to be in bottom and short bar to be on top of long bars, where as in slab opposite to the foooting bars
How much kg steel bars used for RCC slab of size 50' 18' 4.5?
About 2.27 kg of steel bars is used for the RCC slab of size 50' 18' 4.5.
If using composite metal floor deck. what will be the spacing of 12mm diameter deformed bars for 7x7 meter concrete slab?
5.33 is the weight of 12mm dia. bars.
Difference between one way slab and two way slab in construction?
Ans: One way slab is the slab having ratio of longer span to shorter span equal to or more than 1.5 . If the ratio of longer span to shorter span is equal to or less than 1.5, then such slabs are called as two way slab. In one way slab main tensile reinforcement is placed parellel to shorter side which will be the main steel, where as in two way slab both direction required main steel.
In a concrete slab where should steel reinforcing rods be embedded in slab?
A conventional slab will have two bars side by side near the top and bottom of each beam and a 16" grid across the entire top of the slab. Can't help you with a post tention... they are inventing new ways to take steel out of them every day.
Where is the place of main bar in rectangular footing?
in a rectangular foundation long bars to be in bottom and short bar to be on top of long bars, where as in slab opposite to the foooting bars
Why are stirrups not needed in slabs?
You will see the post tention slabs with out stirrups, they are cutting costs. For a conventional slab where you have 4 bars in your beam, stirrups are the best way to hold the bars in place. Some engineers claim the stirrups add zero structural value to the slab.
What is tie bars?
they are deformed bsteel bars or connectors used to hold the faces of building slab in contact
How much kg steel bars used for RCC slab of size 50' 18' 4.5?
About 2.27 kg of steel bars is used for the RCC slab of size 50' 18' 4.5.
If using composite metal floor deck. what will be the spacing of 12mm diameter deformed bars for 7x7 meter concrete slab?
5.33 is the weight of 12mm dia. bars.
Difference between one way slab and two way slab in construction?
Ans: One way slab is the slab having ratio of longer span to shorter span equal to or more than 1.5 . If the ratio of longer span to shorter span is equal to or less than 1.5, then such slabs are called as two way slab. In one way slab main tensile reinforcement is placed parellel to shorter side which will be the main steel, where as in two way slab both direction required main steel.
In a concrete slab where should steel reinforcing rods be embedded in slab?
A conventional slab will have two bars side by side near the top and bottom of each beam and a 16" grid across the entire top of the slab. Can't help you with a post tention... they are inventing new ways to take steel out of them every day.
The distribution patterns of measured earthquake foci depths beneath various convergent plate boundaries that have active volcanic arcs are interpreted as what?
The foci basically outline or emanate from the subducting slab (plate). Multiple foci locations can be used to tell the degree of dip/position of the subducting slab. The distribution patterns also give depth at which melting of slab occurs because earthquakes don't emanate from a partially melted slab, so the deepest earthquake may indicate last solid state of slab.
In the US what slab of nougat-like chocolate mousse topped with caramel and chocolate is called the Milky Way?
Mars bars
What should be the reinforcement details of two way slab of span 18'?
1/2 dia bars @ 6 in c/c
What is the way of reinforcement of one way slab?
if length/breadth equal or greater than 2 then its oneway slab and reinforcement is on the short span because moments are great near the supports
How do you get a secret slab in Pokemon explorers of darkness?
look it up on google ("pokemon explorers of darkness secret slab") and enter it on the main menu
