0
Concrete is polished by grinding with successively finer grades of abrasive discs. The initial grind removes larger imperfections and can be used to grind deep enough into the aggregate of the concrete to show the colour and pattern of the stones. This depth of grinding is more expensive.
Later grinds are are finer and the process can be stopped at any stage depending on the level of finish required.
Ground or polished concrete is sealed afterwards and can be slippery.
The equipment may be hired in order to do it yourself but keep the following in mind:
* The grinding discs can be a significant part of the expense, * The concrete may have variations through it that will only show up on grinding * There is skill involved in producing an even finish
What else can I help you with?
What type of concrete should you use when making a concrete bench?
The best concrete for making a concrete bench is Bench concrete.
What is a sentence for concrete?
The concrete was incredibly hard. The concrete was gray.
What are types of concrete available in the Philippines?
There are quite a diverse range of concrete types in the Philippines. Some of the types of concrete in this country include Fiber-reinforced concrete, Rapid-setting concrete, Fluid-filled concrete, and Pervious concrete.
Can you pour a concrete slab onto another concrete slab?
No. Concrete won't bond to concrete. It will end up cracking.
How we can convert concrete class to ratio?
what is the concrete ratio in Class D2 concrete
How do you remove liquid black shoe polish from concrete?
There are various techniques of removing liquid black shoe polish from concrete. You can use rubbing alcohol or dry-cleaning fluid to wipe of the polish from your concrete.
How can you get nail polish off your concrete driveway?
nail polish remover
What is the avg cost per sq ft to polish indoor concrete?
ewan kho eh,,,...
When to polish concrete?
Polishing or finishing concrete is a purely cosmetic decision. Usually, this is reserved for, say, walks leading to a front door, or a short walkway that is heavily travelled.
What product is recommended for renovating garage floors?
Fill creacks in cement/concrete with fillers. Paint floors with epoxy garage kits. Polish existing concrete to a shine. Use a concrete stain many colors to choose from.
How can I make smooth concrete?
To make smooth concrete, you can use a concrete mix with the right proportions of cement, sand, and aggregate. Ensure proper mixing and pouring techniques, and use a trowel to smooth the surface before it sets. Consider using a concrete sealer or polish for a smoother finish.
How do you remove nail polish remover from a stained concrete floor?
Pure acetone. the main solvent in nail polish remover is acetone the acetone has changed the colour of the stain on the concrete, wash the area afected with pure acetone reapeat several times this will remove the other ingredents in the nail polish remover if the stain on the concrete does not return to its natural colour then sand it and restain.
Is concrete polishing a good option for finishing a new driveway?
Concrete polishing is a great way to make concrete look nice when it is finished. Just make sure that the climate and weather conditions you live in support the polish so it looks good for years to come!
How do you get sharpie marker off concrete?
Mr. Clean Magic Eraser! trust me it will work or if you dont have that use bleach and sunlight or fingernail polish remover =)
How can I properly finish a concrete floor to achieve a smooth and polished surface?
To properly finish a concrete floor for a smooth and polished surface, follow these steps: Start by leveling the concrete surface with a bull float. Use a power trowel to smooth out any imperfections. Apply a concrete densifier to strengthen the surface. Polish the concrete with a series of progressively finer grit diamond polishing pads. Seal the surface with a concrete sealer to protect and enhance the finish.
How can I achieve a smooth and shiny finish when working with concrete?
To achieve a smooth and shiny finish when working with concrete, you can follow these steps: Start by properly preparing the concrete surface by cleaning it and removing any debris. Use a high-quality concrete mix with a fine aggregate to reduce the chances of surface imperfections. After pouring the concrete, level and smooth the surface with a trowel. Allow the concrete to partially set before using a steel trowel to further smooth the surface. Once the concrete is fully set, use a concrete sealer or polish to achieve a shiny finish.
How can I achieve a smooth and polished finish on concrete floors?
To achieve a smooth and polished finish on concrete floors, you can follow these steps: Start by grinding the surface of the concrete to remove any imperfections and create a smooth base. Apply a concrete densifier to strengthen the surface and reduce dusting. Polish the concrete using progressively finer grit diamond polishing pads until you achieve the desired level of shine. Seal the polished concrete with a high-quality concrete sealer to protect the surface and enhance its appearance.
