To remove cement from a metal doorframe, start by using a plastic putty knife or scraper to gently chip away the cement without scratching the metal. If the cement is stubborn, you can soak it with water to soften it or use a mixture of vinegar and water for a more effective solution. For tougher spots, a wire brush or sandpaper can be used, but be careful to avoid damaging the frame. Finally, clean the area with water and dry it thoroughly to prevent rust.
with a hammer and chisel
Yes, but the walls of the hole may contaminate the cement. Mixing the cement may be very hard, and precarious. Further, you may not be able to remove all the cement from the hold afterwards. It is more advisable to use a cement-mixer.
Normally you have to cut them off with a grinder. A grinder with a metal cutting blade will allow you to take them down flush with the concrete. Wear eye protection though it does throw lots of sparks and some concrete.
M 40 MIXING RATION SAND AND BLUE METAL CEMENT
It is not hard task. If you want to break the cement then you should need some strong thing like a good metal detector. Hammer is also another good weapon to break cement easily. Try anyone for this purpose.
Yes, their should be two screws.
Hydrochloric acid is a common substance that dissolves cement and can be used to effectively remove it.
remove it buy washing with oil
with a chisel?
cut it out of the clothing
cement, metal and hold metal together
wet a rag pour a can of coke on it and then rub it on the cement. then get a stiff wire brush and then rrub it against the cement
no it has a metal and cement base
If the cement is not too old, try water and a soft scrub brush.
with a hammer and chisel
Remove and replace it.
for 100sft or 100cft