Shut off the supply line and disconnect it from the tank. Flush the toilet and hold the lever down until all the water runs out. If you are strong enough to pick up the toilet you can stop there, if not, use a sponge or towel and get the rest of the water out of the tank. Use a cup to get as much water out of the bowl as possible. On the base of the toilet on either side there should be two caps. Under these are the bolts holding the toilet down. Some toilets also have screws on either side at the front of the tank. If present, remove them also. If you can pick up the toilet, do so and set it on a towel. This will catch the water and also not scratch the floor. The old wax ring may be around the drain or on the bottom of the toilet. Remove it and the black ring that is probably there. If the drain is at least flush with the floor, a regular thickness ring should be enough. If there is any doubt, use an extra thick one or stack two together. The excess wax will push out. Put the new rings in place on the floor, make sure the bolts are pointing up and set the toilet back in place. Push down on the toilet at the back of the seat with all your weight to to compress the wax ring and form a good seal. Tighten the nuts and install the trim caps.
If you can't pick the toilet up, tip it forward enough to get the ring under it and let it gently back down.
If any of my employees used a sponge to remove toilet water Id fire them on the spot.
In America we have something called a "wet dry Vacuum" a brand new invention that works wonders when removing water from a fixture or just for general cleaning .
Using the wet dry will do the following
1- Remove remaining water from a tank
2- Remove water from the bowl
3- Makes for easier dumpng rather then lifting china and the weight of water
Also not all toilets are low down tanks some are flushometer and STILL a wet dry will work wonders
You probably need to replace the wax ring and possibly tighten the two bolts that hold the toilet to the floor.
It is not difficult to change a wax ring,but you should consult a plumber to make sure there is no other damage.
You need a new wax ring.
If leaking at toilet flange, wax ring needs replaced.
depending on your area, $80.00 on up.
To fix a toilet wax ring leak, you will need to remove the toilet, replace the wax ring, and then re-install the toilet. Make sure to clean the area thoroughly before installing the new wax ring to ensure a proper seal.
The toilet wax ring is probably cracked and leaking.You have to drain and remove the toilet to replace the wax ring below it.Hope this helps!
Common causes of a toilet leak at the base include a damaged wax ring, loose bolts, or a cracked toilet base. To fix it, you can replace the wax ring, tighten the bolts, or replace the toilet if it is cracked.
To fix a leaking toilet seal, you will need to replace the wax ring that seals the connection between the toilet and the floor. This involves removing the toilet, cleaning the area, and installing a new wax ring before reattaching the toilet.
You can find detailed instructions for replacing the wax ring under your toilet at http://www.hammerzone.com/archives/bath/fixt_repair/toilet/wax_ring/replace.htm. It should cost around $20.00 to complete this job.
Replace the wax ring with a double wax ring and shim the porcelain at the floor with plastic wedges, available at any home improvement store.
The wax ring is just to seal the toilet to the drain. It has no effect on the flushing.
You can find a solution for a leak from under the toilet by checking the wax ring seal and tightening the bolts at the base of the toilet. If the leak persists, you may need to replace the wax ring or seek professional help from a plumber.
The wax ring which seals the toilet to the drain is leaking. turn off water, drain tank by flushing. Disconnect water line. remove tank, unbolt toilet from floor. Remove any old wax from toilet and drain. Replace with new wax ring. Reset toilet and press firmly into place.
Remove the toilet from the floor, locate the broken tip, and replace the toilet. Don't forget the new wax ring.
Common causes of toilet bowl leakage include a faulty wax ring, loose bolts, cracks in the bowl, or a damaged flange. To fix it, you can replace the wax ring, tighten the bolts, repair the cracks, or replace the flange.
The name for the wax seal for a toilet is a wax toilet ring. Some people also call this item a toilet wax bowl gasket.