Reversing polarity is not possible with an ac motor. Some do have wiring that will allow you to change rotation. The type and model of the motor can tell you if it is reversible.
No changes will occur by wiring a 110 volt motor in reverse polarity, rotation will always be the same. Some single phase motors are designed to be reversed ,but that is a function of the relationship of start windings and capacitors and requires some wiring changes in a motor junction box or an end terminal housing, not by just changing the incoming power.
Reverse any two of the lead wires at the motor junction box.
Permanent magnet field motors. With a these motors, a permanent magnet is used to replace the field coil. DC power is connected via the brushes, to the armature only. Reversing the polarity, will cause the motor to reverse its direction of rotation. It is very common to use a switch to intentionally reverse to the polarity, to allow reversal of the motor if desired.
DC shunt motor can be reversed by changing the polarity of either the armature coil or the field coil.
It depends on whether the field winding of the dc motor is connected in series or in shunt with the armature winding.If it is connected in series,the motor will rotate since the torque,which varies as the product of the armature and field current is always positive.Thus,a positive average torque causes the motor to rotate,however the pulsating nature may cause the commutator segments and brushes to wear out. Thus only small sized dc motors may be used with ac supply.
No, unless it is a three phase motor and you reverse only two of the phases.
yes sir
Reverse the polarity of armature windings of the motor.
Yes if it's a dc motor with a permanent magnet field, or if it's a 3-phase ac motor. No if it's a single-phase ac motor or a dc motor with a field winding in series or parallel with the armature. <<>> Single phase AC motors can be reversed by using a reversing switch. Reverse either the start winding or the run winding connections but not both.
No changes will occur by wiring a 110 volt motor in reverse polarity, rotation will always be the same. Some single phase motors are designed to be reversed ,but that is a function of the relationship of start windings and capacitors and requires some wiring changes in a motor junction box or an end terminal housing, not by just changing the incoming power.
If you are talking polarity. DC motors automotive application run poss to neg. But any dc motor can reverse by changing polarity.
Reverse any two of the lead wires at the motor junction box.
I think by 'cross wiring' you mean reverse polarity. This means the hot wire is connected to the neutral screw and the neutral wire is connected to the hot screw. This shouldn't have any impact on an AC motor, since AC voltage already changes polarity 60 times per second.
how reversing an ac single phase induction motor to wark as induction generator
We have the capacity to reverse the polarity of a DC voltage, at least as regards what we apply it to. When we consider a DC motor, like, say, the ones in the little "robot wars" we see on TV, the motors can be run in reverse by reversing the polarity of the applied DC voltage. We normally consider AC as already reversing its polarity. It is, after all, AC, which is alternating current. The current alternates because the voltage alternates. We'll avoid any further discussion of the polarity of AC voltages here and leave it at that.AnswerThe problem, here, is that 'polarity' has several different meanings.Polarity, in the sense of 'electric charge' cannot really be applied to a voltage (potential difference) although it can be to a potential (although the polarity is relative; it depends on the point of reference).Polarity, in the sense of 'direction', can be applied to a voltage. For example, is the voltage acting clockwise or counter clockwise around a circuit?Polarity, in the sense of 'connection', can be applied to a voltage. For example, it's important that the line conductor is connected to the centre terminal of an Edison lamp holder or to one or other of the slots in a receptacle (power socket).
The direction of a singular phase induction ac motor can be reversed by switching the capacitor in relation with the motor windings. When started in the reverse direction, the motor will maintain the same torque level that it had in the forward direction.
a general purpose D-C motor can be reversed by changing the polarity of either the armature or the field but not both