As long as it is an induction 110 volt motor it can be reversed; if it is any other type of motor it cannot be reversed. You will have to get into the windings to bring both leads to the start in order to make it go in reverse.
<<>>
A split phase induction motor has two sets of coils and a centrifugal start switch. The start winding is in series with the start switch. The start winding provides a rotating magnetic field in one direction enabling the motor to start. The motor can be reversed by reversing the connections of either the start winding or the run winding but not both.
No changes will occur by wiring a 110 volt motor in reverse polarity, rotation will always be the same. Some single phase motors are designed to be reversed ,but that is a function of the relationship of start windings and capacitors and requires some wiring changes in a motor junction box or an end terminal housing, not by just changing the incoming power.
Sorry, won't work. You need a 110 volt supply.
Because the capacitor only needs to "excite" one of the two phases of the 230 volt supply in order to start the motor.
110v 40 uf
110 volts divided by 1,300 watts(1.3 kw) = .09 kw or 900 watts.
No, unless the motor was wound for dual voltage operation, which it will state on the motor nameplate, a 110 volt motor run on 240 volts will be damaged.
No changes will occur by wiring a 110 volt motor in reverse polarity, rotation will always be the same. Some single phase motors are designed to be reversed ,but that is a function of the relationship of start windings and capacitors and requires some wiring changes in a motor junction box or an end terminal housing, not by just changing the incoming power.
Sorry, won't work. You need a 110 volt supply.
Because the capacitor only needs to "excite" one of the two phases of the 230 volt supply in order to start the motor.
Http://www.micro-reducer.com Contact:Qin email:maili.motor@gmail.com
110v 40 uf
only if it,s a multiple voltage motor, there should be a plate showing the hook up, if,s showing 110v /220v then yes other wise NO,
Only use 110-120 volt appliances on a 110 volt socket.
110 volts divided by 1,300 watts(1.3 kw) = .09 kw or 900 watts.
Yes
NO
no