To rough up concrete, you can use a concrete grinder or sander equipped with coarse grit to create a textured surface. Alternatively, for smaller areas, a wire brush or chisel can be employed to scrape and etch the surface. If you're looking for a more aggressive method, a concrete scarifier can also be used to remove the top layer and achieve a rough finish. Always ensure you're wearing appropriate safety gear when performing these tasks.
it can be done == you can pour self leveling cement mixture over old concrete but you must first rough up surface of old concrete then put bonding agent then mix self leveling mix very wet so you can pour from high spot and it will run to lower areas . Use wood furring strips ripped at an angle to compensate for the angle in the sloped concrete.
No. Concrete won't bond to concrete. It will end up cracking.
More likely reinforced concrete.
What you need to do first is to check if you have that room near the threshold of the door for that extra concrete(which is minimum of 3.5" inches) then you need to remove the top surface of the old concrete to be rough surface don't break too much just about an 1"wash clean and let it dry and only then to install the new concrete.
the strength that it has gained is the main thing, but usually 5 to 7 days as a rough guide.
3-4
The scattered reflection occurs when a straight ray of light is reflected from hitting rough concrete.
The best methods for smoothing out rough concrete surfaces include using a concrete grinder or sander, applying a concrete resurfacer or overlay, and using a concrete patching compound to fill in any cracks or holes. These methods can help achieve a smooth and even finish on the concrete surface.
Concrete. Bitumen breaks up with constant rain and wear and tear. Concrete has added bonus of being smoother to drive on and can also be rough like tarmac to give added grip around corners.
That is the underground drainage plumbing under a concrete floored dwelling, which has to pass inspection before the concrete is poured.
To smooth rough concrete surfaces effectively, you can use a concrete grinder or sander to remove imperfections and create a smooth finish. Start with a coarse grit and gradually move to finer grits for a polished result. Additionally, using a concrete sealer can help to further smooth and protect the surface.
To make concrete smooth, you can use a concrete float or trowel to level the surface while it is still wet. You can also use a concrete grinder or polisher to smooth out any rough spots after the concrete has dried.
A rough frame used to form openings in concrete walls.
Rough formwork refers to the temporary mold or framework used in construction to shape and support concrete until it hardens. Typically made from materials like plywood, timber, or metal, rough formwork is characterized by its unfinished or coarse surface, which can leave a textured finish on the concrete. This type of formwork is often used for structural elements like walls and slabs, where aesthetics are less of a concern. After the concrete cures, the formwork is removed, allowing the concrete to take its final shape.
Yes, the noun 'snoring' is a concrete noun, a word for breathing with a rough hoarse noise while sleeping; a word for a physical sound.
Rough side up
Those which are rough: gravel, sandpaper, concrete asphalt etc.