0
What else can I help you with?
How program instructions transfer in and out of memory?
The instructions have to remain in memory at all times while the program is running. They get there by loading the entire program into memory. The CPU's instruction registers keep track of the current instruction and the next instruction.
What is the difference between load and store for computer science?
LOAD-means to keep an instruction or prog on the memory i.e ram STORE-means to keep the result or instruction or prog to a permanent location for further use load means take a prog to memory. store means save the prog to the parmanent memory
What is page in and page out?
Page in and page out are actions taken by a virtual memory manager (VMM) as it adjusts the assignments of the memory mapping hardware. When a reference is made to a non mapped page, a page fault occurs. The VMM finds a page to release, usually the least recently used page, and checks it. If it is dirty, i.e. modified since loaded, the VMM pages it out by writing a copy to the page file. Then the VMM adjusts the mapping registers and locates the referenced page, either in the page file or in the executable image, and pages it in by reading the copy into memory. The faulting instruction is then restarted. Please see the discussion page.
Why contents of a program counter change?
The PC (program counter) is a CPU memory variable, commonly called a "register," that the CPU uses to track where the current executing instruction is located in memory, or on some CPUs, where the next instruction to execute is. Without a PC, the CPU would not know where the code it is currently executing is stored, and thus would not be able to run programs.
What is von-neumann archtecture and explain it with the help of diagram?
von neumann is the of person who first time notice data and instruction can resides in a single memory. he proposed that there should be a unit performing arithmetic and logical operation on data. these unit termed as arithmetic- logic unit He also gave another concept regarding logic components and their connection in specific fashion. All the components should be control by control unit. The memory unit stores all the information in a group of memory cell,also called memory location where data and instruction can resides in binary form
What does 'the instruction at 0x7c3a1bb8 referenced memory at 0x00000004 the memory cold not be read mean?
This is an error within the program code due to compatibility issues.
What can you do about the following error 0046981EXE Application Error The instruction at 0x0042994 referenced memory at 0x00000000 The memory could not be written?
Check your memory timings in your "Bios", they are not set correctly.
How do you correct the instruction at 0x777745b8 referenced memory at 0x02103c78?
This is a memory error type which depends on Explore's (browser's) version. Because of old version of browser this memory could not read. Set up newer version!
How can you repair this error Qconsole exe - Application Error The instruction at 0x7c9105f8 referenced memory at 0x04860010 The memory could not be read?
Try to run "SFC /SCANNOW" and fix the computer as it will help!
The instruction at 0x77e41abc referenced memory at 0x77e41abcThe memory could not be written.I am using windows server 2003.While clicking on SQL Monitor .I am getting this error.Can any one help me?
NO!
When you highlight the name of a downloaded video or movie you get this message The instruction at 0x02f23397 referenced memory at 0x00000000 The memory could not be written what is wrong?
probably the owner of the site you got it from had the movie copy protected
What causes the error 'The instruction at address referenced memory at address The memory could not be written'?
Data or DLL MFT or directory corruption. reinstall your os, unless you are getting the error from a CD or flash drive.
The instruction at 0x10078e20 referenced memory at 0x10078e20 the memory counl not be written?
This is usually caused by a bad memory stick. Open up the PC and remove the memory-sticks. clean the contacts with an eraser and blow away the remnants, reinsert the memory and restart the PC. If this does not work you may need a new memory stick.
Instruction 0x05406531 referenced memory at 0x06c98fd4 The memory could not be read?
It sounds like your are trying to access and element in an array or vector that is out of bounds. I.e. an array of size 5 you are trying to access the size 5+i element.
What does an error message for CS Source mean when it says The instruction at 0x108e32c referenced memory at 0x0e63a1a0. The memory could not be read?
means that what ever code was in that memory was corrupt. if it keeps doing it, it means the program is corrupt, or files it interacts with. you'll probably have to reinstall.
When i turn off the internet explorer there is an error message says the instruction at 0x7ezac6fb referenced memory at 0x021c1feo the memory couldn't be read click OK to terminate the program?
A file is probably missing try to re-install it from the Microsoft website
The instruction at 0x6600accc referenced memory at 0x6600accc. The memory could not be read. Click OK to terminate the program?
Turn off tabbed browsing in the yahoo toolbar. http://www.jcxp.net/forums/index.php?s=b... http://messages.toolbar.yahoo.com/toolba...
