answersLogoWhite

0

By installing a GLOBE valve to throttle down the volume

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Why is water pipes wrapped in foam rubber?

Water pipes may be covered with foam rubber to stop condensation dripping from the surface of cold water pipes in warm and damp climates, and to insulate hot water pipes so the water in them does not cool while flowing from the hot water tank to the faucet,


Why is plastic foam used to wrap hot water pipes?

to stop condesation of water from the surface of pipe.


Why is copper used for hot water pipes?

Copper is used as hot water pipes because the copper will not corrode when the hot water goes through the pipes


Why is copper used for water pipes?

Copper is used as hot water pipes because the copper will not corrode when the hot water goes through the pipes


How do you stop the pipes from rattling when turning on hot water in bathroom tub?

Install anti-hammer arrestor in hot water line at tub. It should help.


Are my hot water pipes frozen?

If your hot water pipes are frozen, you may notice a lack of hot water coming out of the faucets. You can check for frozen pipes by feeling the pipes for cold spots or listening for unusual sounds when you turn on the hot water. If you suspect your hot water pipes are frozen, it's important to take action to thaw them to prevent damage.


Why does running hot water in a fauset make a whistle sound?

Running hot water through a faucet can create a whistle sound due to the vibration of the water flowing through the pipes. When hot water flows, it can change the pressure and speed, causing the water to interact with the faucet or pipe fittings in a way that produces vibrations. These vibrations can resonate and create a whistling noise, especially if there are any bends or obstructions in the piping. Additionally, air bubbles forming in the hot water can also contribute to this sound.


Should supply line coming out of hot water tank have a drop down leg in it to keep the tank from losing heat out the pipes?

No this is not necessary. Install the pipes as per usual. You can insulate the hot water pipes up to two meters or up to two yards from the hot water outlet from the hot water tank to prevent this. No this is not necessary. Install the pipes as per usual. You can insulate the hot water pipes up to two meters or up to two yards from the hot water outlet from the hot water tank to prevent this.


Have heat tape on pipes but no hot water why?

Heat tape is just for keeping the pipes from freezing, it does not heat the water. That's what the hot water heater is for.


Can hot water pipes freeze, and if so, what are the potential consequences and how can they be prevented?

Yes, hot water pipes can freeze if the temperature drops low enough. The potential consequences of frozen hot water pipes include burst pipes, water damage, and loss of hot water supply. To prevent this, you can insulate the pipes, keep the heat on in your home, and allow faucets to drip during extremely cold weather.


Why is there no hot water during a freeze?

During a freeze, water in pipes can freeze and expand, causing the pipes to burst. This can lead to a loss of water pressure and potentially no hot water as the pipes are damaged and unable to deliver it.


What causes water pipes to whistle?

This can be caused by a condition called water hammer or somewhere in the house the straps that hold the pipes could have come lose. There could be a check vavle installed near your water meter that is bad or you might have a diagram tank and the bladder broke. (hot water only) Water hammer, when water is in motion is forced to stop or change direction suddenly due to pressure.