0
You need a TV signal splitter. They're cheap and available just about everywhere, like Walmart, K-Mart, electronics stores. Just split the `antenna out' connection from the cable box. You'll also need a couple more signal wires (coaxial cables) otherwise you'll be two wires short of having what you need. One from the cable box to the splitter and then one for each TV.
What else can I help you with?
How does an electrical power cable affect a coaxial signal cable?
There isn't or shouldn't be any power in coaxial cable. It is just for the TV or computer hook up. Just so you can receive the signal from the broadcaster or Internet. In several ways the previous answer is wrong. Firstly coaxial cable is exactly like normal 2 wire cable (fig8 cable) except that instead of two separate wires running side by side separated by insulation) one wire is inside the other (again separated by insulation). There are many different types of coax (probably hundreds eg one i use is rg-58 which is for two way radios, another is rg-6 which is used for tv coax) secondly- if any signal is to be passed through a cable- there has to be power flowing through it- it may be incredibly small (microvolts like from your tv antenna) or very large (hundreds of volts like in a high powered radio transmitter) Even in a tv coax, if you have a `masthead amplifier' that only has 1 cable running up to the antenna and a funny box behind the tv that has 2 coax leads running into it and a plug-pack from a PowerPoint going into it as well- you would find that you are actually passing power up the coax from the PowerPoint plug-pack to the electronics up on top of the tv mast - power going up and tv signal coming down the same coax at the same time- saves on another two wires having to be run!!! Many `cable' tv or internet cables have a similar `power over coax' arrangement for powering amplifiers on long cable runs, this is normally stopped by a filter before the end users outlet however (if the filter is faulty this can be the `tingle or zap' that you sometimes get when touching the outer screw connector of the coax plug)
Can an analog tv receive a digital cable signal?
using two subcarriers and a main carrier signalaudio subcarrier is frequency modulated with audiocolor subcarrier is phase modulated with chromamain carrier is amplitude modulated with sum of video and modulated audio subcarrier & color subcarrier; then lower sideband is suppressed by a filter.closed captions are serial ASCII encoded characters embedded in vertical blanking of video signal
What is the purpose of a Cable tester?
A cable tester is used to test the electrical connections in a cable or other wired device. There are two ways to test for a connection: continuity test and resistance test. A cable tester can also test for a short by determining voltage.
How do you set up a PlayStation 3 to play games step by step?
Buy a PS3 and take it homeIf you have an HDTV Buy a HDMI Cable alsoIf you want internet and have an internet service buy a router with or without wireless and one (WiFi connection) or two ethernet cables (ethernet connection)If you do not have internet service and want the internet Sign up with a Cable or DSL ISP ( Internet Service Provider)The PS3 can go next to or under your TV if you want it to stand up because of space you also need to buy a vertical stand.The A/V cable that comes with the PS3 is for 480i or standard connection with two audio and one video plugs that connect to the back of all TVs with RCA plug connections which are color coded and the HDMI goes into the PS3. For HDTVs that you want the best connection and 1080P or any HDTV reception plug an HDMI cable that you purchased into the PS3 and the HDTV.Plug the PS3 power cord in both locations and you may have to turn the TV or HDTV to the location the PS3 was plugged into with the A/V or HDMI cable.Plug your Controller into the cable for charging the controller and into the USB port on the front of the PS3. It will work without being charged as long as it is plugged in. You can use the controller to move about the screen that should be on your TV for the PS3There is a button to push for the game or disc drawer to open and a game can be inserted and will close automatically after you give it a little nudge. Games are expensive and should not be left out of the drawer or there cases. There are also a number of settings you may decide to adjust and it is just too much for me to try to tell all the different conditions. You should go to setting and have your controller shut off with the PS3 or it will just stay on and discharge. The PS3 will not charge your controller while it is off.How do I connect the PlayStation 3 computer entertainment system to the Internet? has been added for the related link for an internet connection if you are going to have one. It is recommended as the PS3 and it's games were designed for an internet connection but will work without it.The related link has a video for signing in to the Playstation Network account if you have an online connection How do I create a new PlayStation®Network Master account?
Is a tv a compound machine?
A compound machine is any type of machine that is made from two or more simple machines working together. A modern TV is not a compound machine since it has no moving parts.
How do you have two TVs in the same room with only one cable outlet?
You get a Splitter
Can two digital cable boxes be wired together so that you can watch tv on one channel and record on another channel at the same time?
Yes, connect the incoming coax cable to the input of a two way splitter box and the output coaxes to the input of the cable boxes.
What is HDMI splitter cable used for?
The purpose of an HDMI splitter cable is to take HDMI signal from a source (such as satellite television service) and split that signal to multiple televisions. Such splitter cables are very handy to have when one owns more than one high definition television and wishes to enjoy high definition programming while saving money.
How do i get the hd channels to come in when i split the cable to two tv's?
If the antenna cable is connected to a splitter the signal drops 50% to each TV. This might be too low for the TVs to work. The solution would be to use a powered splitter instead of a passive one. This type will produce a full power signal at each output.
Cable spliter for 3 TVs it worked fine until you hooked up a digital cable box now the other two rooms can must turn the tv to channel 3 and can only see the channel the box in turned to?
Sounds like you hooked the 3-way splitter to the RF out coax jack on the cable box, which only puts out rf on channel 3 and only what the box is tuned to in regards to programming. Hook up the line from outside to the input of the splitter, each output of the splitter to each cable box/tv input.
What is the purpose of using a coaxial splitter?
The purpose of using a coaxial splitter is so that one can connect more than one device to a single coaxial line. For instance connecting two TV's to one coaxial line for cable television.
Your tv and your sisters tv are both on the same areal and its digital but when she turns hers on mine looses signal and gets bad signal how do you fix this?
The system should have a coax cable running from the antenna to a two way RF Splitter with one input and two outputs. One output needs a coax cable run to one TV and another coax cable connected to the second output and run to the second TV set. If the signal is not strong enough, use a powered splitter instead of a passive one.
How does one connect Ethernet cable splitter?
"An ethernet cable splitter allows you to connect two computers to one ethernet connection. Once you have your splitter made, you plug it into both computers just as you would with a normal ethernet cable."
Tips For Installing Your Cable Modem?
Once considered a highly technical device only for the most technologically capable, the cable modem is now a tool used in the vast majority of households. If you want to use your cable modem in the same general area as your television but you are having trouble with just one cable jack, then maybe you should invest in a splitter. A splitter will essentially make it so that you can run one cable to the modem, and one to the television. This can be an excellent alternative to having two separate devices in different locations of your home.
Will a video cable splitter allow two monitors to work off the same pc?
A video splitter type cable will allow you to view 2 monitors.
How does a monitor splitter cable work?
A computer monitor splitter cable is used to send video signal from one monitor to a second monitor. This may be helpful when making presentations to meetings or for demonstrations in classrooms.
How do you hook up two TVs to one xbox360?
You would need either an HDMI splitter or a component splitter depending on what you use. Note that despite having two TV's, if you are playing two player both screens will still be split down the middle.
