How does a fixed bore expansion device respond to a reduction in load?
Due to temp. variation the shaft will expand axially, to accept this expansion only one bearing on the shaft is fixed axially in the housing, are called Fixed Bearing. It can also mean that an object is at a steady angle away from another object
there is 2 types of componant 1-passive compnant:who provide a fixed voltage to active componant we can not use them in rectification or amplification,registor,capacitor,inductor 2-active componant:we can use its as a amplifier r rectifier,diode,transistor,scr,etc (we can use registor for voltage drop,so it is passive componant)
a fixed loop is obviously a loop that is fixed ;D
Resistors are one of the three basic electronic components. They restrict the flow of current in an electrical circuit. Fixed resistors have a fixed value of resistance, and are used in almost every electronic circuit for lots of different reasons.
A moving coil galvanometer is a type of scanning device used in the transportation and trucking industry. The vehicle is pulled through a fixed scanner while an operator watches a closed circuit television.
to allow for expansion and contraction
The metering device. Depending on what type of system you have, this will either be a Fixed Orifice Tube or it will be a Thermal Expansion Valve.
Expansion
The 98 Blazer doesn't have a Thermal Expansion Valve... it has a fixed orifice tube.
It will shift down.
The ford focus has a fixed orrifix in the pipe from the evaporator to the condenser .it is replaceable with a special tool. It does not have a mechanical expansion has such.
On the day of the surgery, the stereotactic frame will be fixed to the patient's head.
Depreciation is allocation of fixed asset cost to income statement of useful life of asset that's why shown as reduction in fixed asset value.
The answer is the motherboard.
The ac system on a Ram doesn't use an expansion valve. It uses a fixed orifice system.
There are two parts which do. The first is the compressor - the high side starts at the compressor outlet. The other is the metering device (either a Thermal Expansion Valve or a Fixed Orifice Tube). The high pressure high ends at the metering device inlet. The low pressure side starts at the metering device outlet and ends at the compressor inlet.
A discount is a reduction of an item price either by a percentage or a fixed amount, resulting in net lower cost.