answersLogoWhite

0

turbo blower is an equipment where a turbine is attached with the blower part. steam enters through the turbine inlet and expands through the blades and goes to the outlet which helps the turbine shafts to rotate. this turbine shaft is attached with the shaft of blower that makes the blower rotating.

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Engineering

Why centrifugal pump cant work on air but centrifugal blower works?

it is due to the difference in the air intake and impeller construction.


What is better turbo c or dev C?

Depends upon the personal opinion. They both are different IDE. Dev C used the MICGW compiler while Turbo C uses Borland compiler. Hence due to this, certain inbuilt functions will not work in Dev C. clrscr() is one such function. However Turbo C is outdated and does not use follow many of the programming standards.


Discuss why the damper winding are not used in turbo generator?

It is definitely used in a turbo-generator


What are the 3 turbo c language components?

Borland Turbo C came with an editor, compiler, linker and debugger, all of which were tightly integrated into the Turbo C IDE (integrated development environment). The professional version also came with standalone versions of the Turbo Assembler and Turbo Debugger. Note that Turbo C is 27 years old. As such it is redundant. All Borland development tools are now owned by Embarcadero. Turbo C is now classed as "antique".


How the 3 phase air blower work?

A 3-phase air blower operates using a three-phase electric motor that drives the blower's impeller to move air efficiently. The motor utilizes three alternating currents, which are phased 120 degrees apart, providing a smooth and continuous power supply. This design allows for higher efficiency and greater torque compared to single-phase motors, enabling the blower to handle larger volumes of air at consistent pressure. As the impeller spins, it creates a pressure differential, drawing in air and expelling it through the outlet.

Related Questions

How to correctly choose and install a turbo blower air pipe?

Turbo blower air pipe selection is different from roots blower: Air pipe diameter shold be bigger than turbo blower diameter. Even air pipe equal to turbo blower outlet diameter is not a wise choice. There are 2 advantages: when air pipe diameter is bigger than turbo blower outlet diameter, pipeline resistence will reduce and save electricity.  it lower the noise in turbo blower house.


How to Change the blower motor 4Runner?

Leave the fan on and put a clutch under the fan,than if you have a turbo connect the fan blower to the turbo


How to reduce high speed turbo blower noise level?

Yes, it's not how to reduce roots blower noise level, it's how to reduce turbo blower noise level. Normally turbo blower noise level is less than 80 dba when roots blower noise level is more than 90 dba, some user are still not satisfied, they want the noise level below 60 dba or even 50 dba. Turbo blower ZCJSD has it's own suggestion to reduct turbo blower noise level: Wrap the outlet pipe with sound-absorbent material, please see below photo:


What is the advantage and disadvantage of blower?

defference between a blower and a turbo charger when installed in a petrol engine


How to correctly install high speed turbo blower at site?

When we talk about high speed turbo blower, we think it as the higher stage of roots blower, it's true. And when we install at site, site engineer take it same as roots blower, is it true? here is the question, how to correctly install high speed turbo blower at site? Let's take a look at the two installation proposal at site as below: Proposal 1, turbo blower air outlet pipe is 90 degree vertical angle to main air pipe; Proposal 2, turbo blower air outlet pipe is slightly, around 20 or 30,  bigger angle than 90 vertical to main air pipe; Which is better? the answer is proposal 2. installation as per proposal 2  is the most beneficial way for the air from turbo blower to affflux into main air pipe, which avoid back pressure for other turbo blower, decrease noise and vibration, save electricity.


Ecu from a 95 automatic eclipse fit a standard?

If the car is the same as in it came out of a non-turbo and your putting it in a non-turbo it will work but if it came out of a non-turbo and your putting it in a turbo then it won't work. If it came out of a turbo and your putting it in a non-turbo it won't work. If it came out of a turbo and your putting in a turbo then it will work.


Can you mount both a turbo and a supercharger?

Yes, There's even some with a supercharger and twin turbos. A "supercharger" is anything the increases the airflow into an engine above atmospheric, there for a turbo and a blower are both types of "superchargers". There are many applications of both turbo's and Blowers on the same engine and any combination of multiple of both, I.e. @ turbo chargers and 2 blowers or a blower and quad turbo's etc etc.


How do you install a blower motor on a 1999 Nissan Altima?

do you mean a turbo? if i were you i woulg have it professionally installed


Why does the heater blower work on 3.4.5 but 1 and 2 don't work?

its the blower resistor.


Are leaf blower engines compatible with go karts?

Yes you can, keep the fan on and put a clutch on it, and run the blower in to the turbo charger, if you keep the fan on it will make it super fast


When the blower does not work on all speeds is it the blower motor?

usually the blower motor resistor pkg. located on or near the blower motor


What does a blower motor resistor do if it is bad?

blower motor won't work