answersLogoWhite

0

If the question is about the motor fan or engine fan, the main function of this

fan is cooling the radiator of the engine which in turn is cooling the water circulating

inside the engine unto the radiator and back. This keeps the engine at a fairly

operable temperature without overheating and damaging damaging its parts.

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Engineering

Why doesn't my 300d Mercedes fan work?

Disconnect the plug to your fan. Hook a jumper wire to ground the negative wire and a hot wire to the positive wire. If the fan doesn't work, then you can buy one on Ebay or other sources.


Will a heat pump compressor burn out if the circulation fan does not work?

If the fan outside is not running the compressor will overheat and if the fan inside the house is not running the compressor will get liquid refrigerant back to it and lock up! Neither is good for the compressor.


What is the work of strainer in fan coil unit?

To strain waste particles in chilled water


What is a story about an industrial accident?

A large ventilation fan was being repaired at a nuclear power plant. The fan was setup in a work area on the turbine deck. The protective screening had been removed. A health physics technician was surveying the fan for radioactive contamination when, due to a failure in communication, the fan was energized. The technician was sucked into the fan and killed.


What is the load on fan?

The load on a fan refers to the amount of work the fan must perform to move air against resistance, which can be influenced by factors such as the fan's design, speed, and the environment it operates in. It is typically measured in terms of airflow (CFM - cubic feet per minute) and the pressure differential (inches of water column) created by the fan. Higher resistance, such as from ductwork or filters, increases the load on the fan, requiring more energy to maintain airflow. Understanding the load is crucial for selecting the right fan and ensuring efficient operation.