A: That depends on local laws but most important is the power output limitations that must be followed
depend on how high your antenna
http://www.amazon.com/Cisco-Linksys-High-Antenna-Connectors-HGA7T/dp/B0002F3G7M is a great place to get the latest high gain antenna with great prices.
Depends on what you mean by high frequency. The rabbit ears antenna used in broadcast TV is a dipole and is used for VHF.
A: It is a terminology to imply that the scanner will be used at the hi end of frequency as opposed to low frequency
The power of the signal, as perceived by the receiver, will be lower with an omnidirectional antenna. This is because the omnidirectional antenna is transmitting in all directions, while the directional antenna is transmitting in only one direction.Think of the directional antenna as a lens, focusing proportionally more power in a smaller space.
There are two main types of HD TV antenna: indoor and outdoor. To use an indoor antenna, one simply connects it to the relevant port in the back of the tv, switches it on at the mains and then proceed to find the correct channel settings. An outdoor antenna is generally placed on the roof or high up and may require masonry drilling and electrical connection, so is best left to the professionals.
A high-gain antenna is an antenna which allows for precise targeting of radio signals due to it's use of a narrow radio wave beam. To use a high-gain antenna you should put attach it to a high, clear surface to allow it maximum range to receive and send radio signals. A good place would be the roof of your house.
There will be some amount of continuity in a k30. There is a coil at the bottom of the antenna base, so the ohm reading will be high, but should still be there.
at least high 10
depend on how high your antenna
http://www.amazon.com/Cisco-Linksys-High-Antenna-Connectors-HGA7T/dp/B0002F3G7M is a great place to get the latest high gain antenna with great prices.
Yes you should if you wanted to buy some because contemporary outdoor furniture provides great comfort and has a high quality and standards. It will be good for your kids.
You will need a Drum scanner.
Depends on what you mean by high frequency. The rabbit ears antenna used in broadcast TV is a dipole and is used for VHF.
High frequency
Finger print scanner, eye scanner (for high security area) ect.
To receive every local TV channel in your area with an antenna, first, determine the broadcast frequencies of local stations using websites like AntennaWeb or TV Fool. Choose a suitable antenna based on the distance from the towers and the type (indoor or outdoor) that fits your needs. Install the antenna in a high, unobstructed location, ideally facing the direction of the broadcast towers. Finally, perform a channel scan on your TV to access all available channels.