A fuse is used one time and replaced. A breaker can be re-set.
An example of a circuit protection device is a fuse. Another example is a circuit breaker.
If you have a light that is not being powered through a circuit breaker or fuse, you should call a qualified electrician to remove this circuit from the panel's bus and install a circuit breaker for it. Without an overcurrent protective device (circuit breaker or fuse) you have a potential fire hazard.
A circuit breaker or a fuse.
Circut Breaker
you can use a fuse or circuit breaker
A circuit breaker does not have a wire fuse in it.
A circuit breaker/fuse is designed to protect the wiring from getting overloaded.
You can reset a circuit breaker but a fuse you must replace.
An example of a circuit protection device is a fuse. Another example is a circuit breaker.
circuit breaker, or "resettable fuse", which is a reallya small circuit breaker in the housing of a fuse
A fuse or circuit breaker used in a circuit is usually inserted in series with the load.
An alternative to using a fuse is to use an electrical circuit breaker.
By a fuse or a circuit breaker.
A fuse or circuit breaker will fit this description.
It does not have a circuit breaker. It uses a fuse to protect the circuit. Look for a blown fuse in the fuse panel under the dash on the drivers side.I believe the cigarette lighter circuit is protected with a glass barrel fuse not a circuit breaker. Check the fuse box for a blown fuse.
A circuit breaker takes the place of a fuse. No.
A fuse must be replaced if blown, a circuit breaker can be reset.