answersLogoWhite

0

1 bar is 14.50377 PSI, so 2.8 bars is 40.610 PSI.

User Avatar

Wiki User

11y ago

What else can I help you with?

Continue Learning about Engineering

What is the tensile strength of uranium?

The density of uranium is 19,1 g/cm3 and the hardness is 6 on the Mohs scale.


What is the allowable maximum heat of hydration of concrete?

heat of hydration should not be more than66 cal/g and 75cal/g for 7&28 days respectively


What is the tensile strength of cotton in lbs per square inch?

If fiberglass is layed up in one direction only (unidirectional) its strength is greater than 100,000 psi for E glass and 250,000 psi for S glass. If layed up in cross plies like fiberglass cloth (G10) strength in tension is about 40,000 psi


What is the psi of a 2 inch by 60 inch pipe and a 1 inch by 60 inch pipe both vertical?

To determine the pressure (psi) exerted by a vertical column of fluid in pipes, we can use the hydrostatic pressure formula: ( P = \rho g h ), where ( P ) is pressure, ( \rho ) is the fluid density (typically water, 62.4 lb/ft³), ( g ) is acceleration due to gravity (32.2 ft/s²), and ( h ) is the height of the fluid column in feet. Since both pipes are vertical and of the same height (60 inches or 5 feet), the pressure at the bottom of each pipe will be the same if filled with the same fluid. However, the diameter of the pipe does not affect the psi at the bottom; it only affects the flow rate and volume. Therefore, both pipes will exert the same pressure at their bases regardless of their diameters, assuming they contain the same fluid.


What has Lonnie G. Johnson invented?

Lonnie G. Johnson has invented many things, but he is most famous for his revolutionary water gun, the Super Soaker.