It depends on the incoming primary voltage. For a 5kva utility transformer receiving 15,000 volts on the primary the current drawn would be one third of one amp to give you an output of 5,000 VA (watts). Just remember this, volts x amps = watts or volt amps.
Amps, or amperes, are a measure of electrical current; ohms are a measure of electrical resistance. Both are widely used in physics.
Wire Sizing Amps
amps - how much electrical output
A 228 sq mm conductor equates to 450 MCM. A conductor of 450 MCM is not a standard AWG wire size. A standard 400 MCM will carry 380 amps. A standard 500 MCM will carry 430 amps. Difference between 400 and 500 MCM amperage's is 50 amps. Transposing between the two amperage's of 50 amps will be 380 + 25 = 405 or 430 - 25 = 405 amps. This is a very rough calculated answer for the question.
The unit for electrical current is the ampere.
If the total bank is 750kVA, full load amps is 902A.
A 4-gauge aluminum wire can typically carry up to 70-85 amps of current for general household wiring applications. It is important to always consult with local electrical codes and a professional electrician to ensure safe and compliant electrical installations.
30 amps is how much a 10-2 wire will carry at 110 feet. 10 gauge wire is only good for thirty amps per the national electrical code. Using 80% of the breakers usage you will actually be getting only 24 amps.
The electrical current in a circuit is measured in amps.
The electrical device supports an amp range of 0 to 10 amps.
140 AMPS
50 amps.
The maximum amperage capacity of the 400 amps main panel in this electrical system is 400 amps.
For a distance of 8 feet and a current of 52 amps, a 6-gauge copper wire would be suitable to safely carry the load while minimizing voltage drop. It's important to adhere to local electrical codes and standards when selecting and installing wiring for any electrical system.
To convert watts to amps, you need to know the voltage of the circuit. The formula to calculate amps is Amps = Watts / Volts. If we assume a standard voltage of 120V, then 750 watts would equal 6.25 amps.
A # 14 copper conductor will be fine to carry 8 amps at 120 volts. This size conductor is rated at 15 amps.
An electrical ammeter.