answersLogoWhite

0

8,000 since 8000*1000(kilo)=8,000,000 (mega)

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Engineering

How is the Deemed Generation calculated in the thermal power Plant?

plant total generation + deemed generation divided by plant capacity multiply by no of hours


How calculate heat rate of combined cycled power plant?

The heat rate of a combined cycle power plant is calculated by dividing the total energy input in the form of fuel (measured in BTUs or megajoules) by the total electrical output (measured in kilowatt-hours or megawatt-hours). The formula is: [ \text{Heat Rate (BTU/kWh)} = \frac{\text{Fuel Input (BTU/hr)}}{\text{Electrical Output (kW)}} ] This metric indicates the efficiency of the plant; a lower heat rate signifies a more efficient power plant.


What is the power output of 100 kw power plant?

Your question shows the importance of using the correct symbols, because your symbols are incorrect and, therefore, your question is confusing.So, are you asking how many milliwatts (mW) there are in a kilowatt (kW), or are you asking how many megawatts (MW) there are in a kilowatt(kW)?Notice that the symbol for a watt is an upper-case W. The symbol for a milli is a lower-case m, and the symbol for a mega is an upper-case M.If the former, then there are one-thousand milliwatts in a watt, and there are one-thousand watts in a kilowatt, so there must be one-million milliwatts in a kilowatt.If the latter, then there are one-thousand kilowatts in a megawatt, so a megawatt must be one-thousandth of a megawatt in a kilowatt.


What is design energy in hydro power?

Design energy in hydropower refers to the estimated amount of electrical energy that a hydropower plant is expected to generate over a specific period, typically expressed in megawatt-hours (MWh) or gigawatt-hours (GWh). It is determined based on factors such as water flow rates, reservoir capacity, and the efficiency of the turbines. This estimation helps in planning and optimizing the operation of the plant to meet energy demands and manage water resources effectively. Properly assessing design energy is crucial for project feasibility and economic viability.


How much does building a hydro power plant cost?

The cost of building a hydropower plant can vary significantly based on factors such as location, plant size, and design complexity. On average, costs can range from $1,000 to $5,000 per installed kilowatt of capacity. Smaller projects may be less expensive on a per-kilowatt basis compared to large-scale plants, which can involve higher infrastructure and environmental considerations. Overall, total project costs can range from millions to billions of dollars depending on these variables.

Related Questions

How much can a 1 megawatt plant produce KWH per month?

A 1 megawatt plant can produce 720,000 kilowatt-hours (kWh) per month if operating at full capacity for 30 days. This is calculated by multiplying the plant's capacity (1 megawatt) by the number of hours in a month (720 hours) to get the total kilowatt-hours produced.


How many kilowatts per month does a nuclear power plant produce?

The correct term is kilowatt-hour, or some multiple of that. One plant that I worked at could net 800 megawatts, so that would be about 576 gigawatt-hours, in a 30 day month. Some plants are larger. I know of some 1,200 megawatt plants, and that would be scaled accordingly, as 864 gigawatt-hours, both assuming continuous operation at full power. Scaled to the units requested in the original question, that 800 megawatt plant would be 800,000 kilowatt-months, and the 1,200 megawatt plant would be 1,200,000 kilowatt-months.


How many KWh does a 1 MW solar plant produce?

A 1 MW (megawatt) solar plant can produce 1 megawatt-hour (MWh) of electricity in one hour under ideal conditions. Since there are 1,000 kilowatt-hours (kWh) in 1 MWh, a 1 MW solar plant can produce 1,000 kWh of electricity in one hour.


How many kWh will produce 1 MW gas fired power plant?

A 1 MW gas-fired power plant operating at full capacity for one hour would produce 1 MWh (megawatt-hour) of electricity. This is equivalent to 1000 kWh (kilowatt-hours).


If an existing power plant can operate at full capacity for 8000 hours per year how many kilowatt hours of electricity can be produced by the plant in a year?

The answer is 8,000 multiplied by the capacity of the power plant expressed in kilowatt hours, which the question unfortunately neglects to specify.


What is the cash creek generation?

In Henderson County, Kentucky, a coal gasification processing plant has been planned to be built to produce 770 megawatt electricity. This coal plant is called The Cash Creek Generation.


How is the Deemed Generation calculated in the thermal power Plant?

plant total generation + deemed generation divided by plant capacity multiply by no of hours


Million units in thermal power plant?

B. T. U.Answer:With the exception of the USA power plant output is measured in Megawatt/hours (Mega=million)


What is the cost of 1 mw generation of power in thermal power plant in us dollars?

The cost of generating 1 megawatt (MW) of power in a thermal power plant can vary significantly depending on factors such as fuel type, plant efficiency, and operational costs. As of recent estimates, the levelized cost of electricity (LCOE) for coal-fired plants typically ranges from $60 to $120 per megawatt-hour (MWh), while natural gas plants can range from $40 to $80 per MWh. This translates to approximately $0.04 to $0.12 per kilowatt-hour (kWh) for thermal generation. However, these costs can fluctuate based on market conditions and regulatory factors.


How can megawatt be in a sentence?

The power plant produces one megawatt of electricity.


How calculate heat rate of combined cycled power plant?

The heat rate of a combined cycle power plant is calculated by dividing the total energy input in the form of fuel (measured in BTUs or megajoules) by the total electrical output (measured in kilowatt-hours or megawatt-hours). The formula is: [ \text{Heat Rate (BTU/kWh)} = \frac{\text{Fuel Input (BTU/hr)}}{\text{Electrical Output (kW)}} ] This metric indicates the efficiency of the plant; a lower heat rate signifies a more efficient power plant.


How many megawatts do tidal turbines produce in day?

A typical nuclear power plant produces 500 to 5000 megawatts of power. If we take 2000 as average, an average plant produces 2000 megawatt hours in an hour, or 48,000 megawatt hours in a day. But please note: Technically, this does not answer the question asked, because the question asked for megawatts, not megawatt hours. The question as asked is like asking how many horsepower a car can produce in a day. The measure of electrical output over a period of time is a watt hour, or, in this case, the megawatt hour. So the question answered was, "How many megawatt hours does a nuclear power plant make in a day?"