0
What else can I help you with?
What is the wall thickness of 500mm pipe?
the wall thickness of sch 40 - 500mm dia pipe is 15mm or 16mm.
How much concrete will it take to cement a 40 foot by 40 ft 6 inches deep?
800 C feet
What is the difference between PVC schedule 40 and PVC 80?
The difference between schedule 40 and 80 pvc is the wall thickness and schedule 80 is thicker then schedule 40 so the higher the schedule number the thicker the wall of the pipe thus can hold more pressure.
What are the five standard parts in a frame wall?
Top plate, bottom plate, end cap for both sides and studs spaced at 16" centers. You may also have a door frame with a header and bracing. Friday September 27th, 2013 9-/27-/13 By:Eliesyn Rene Velez Jr. Source:Yahoo CTEA HS 104 st 11:40 am 5TH period
What is the difference between schedule 40 and 10 gauge pipe?
The gauge of the pipe is the wall thickness. It is easier to say Schedule 40 pipe than .180 inch wall thickness. This is the SCH 40 wall thickness for a standard 12" pipe and the actual gauge thickness will vary based on pipe size and material. The larger the Schedule number, the thicker the pipe wall thickness. Pipe Schedule is also expressed in Std., X-Stg., and XX-Stg. since some thicknesses are more common than others.
How many board feet are in a 40 foot wall?
To calculate the board feet in a 40-foot wall, you need to determine the height and thickness of the wall. Board feet is calculated using the formula: (width in inches × height in inches × length in feet) / 12. Assuming a standard wall height of 8 feet and using 2x4 lumber (which is actually 1.5 inches by 3.5 inches), the calculation would be: (3.5 × 96 × 40) / 12, resulting in approximately 120 board feet for a single layer of studs.
How many foot is in 40 feet?
40 foot = 40 feet
How many dry wall screws per 4x12 sheet?
If you drywall on 16" on-centre studs, with sheet length perpendicular to the studs, and screw the two outside length edges at 6" spacing (as it should be) and the two interior studs at 12" spacing, the answer is 48 drywall screws per 4'x8' sheet.
How many square feet is 40 foot x 50 foot?
40 x 50 = 2,000 (sq ft).
How many square feet in a 5 foot by 8 foot room?
5 x 8 = 40 40 square feet
How many yards is 120 foot?
40 yards
How many cases in 40 foot container?
2444
How many square feet in a 40 foot wide octagon?
It is not possible to answer this question since a 40 foot octagon could be extremely long.
How many square feet in a 25 foot by 40 foot yard?
1,000 square feet.
How many square feet in 4 foot by 40 foot?
A total of 160 square feet.
How many studs to build 24' x 40' garage?
To determine the number of studs needed for a 24' x 40' garage, you typically space studs 16 inches apart on center. For the walls of the garage, you'll need to calculate the total linear footage of the walls (2 x 24' + 2 x 40' = 128'). Dividing that by the spacing (16 inches, or 1.33 feet), you would need approximately 96 studs for the walls, not including additional studs for doors, windows, and structural supports. Always consult local building codes and consider any additional structural requirements.
How many square feet in a room 12 foot x 40 foot?
12 feet X 40 feet = 480 square feet.
