0
What else can I help you with?
How many 80 lb.bags of concrete mix does it take to fill an oil drum?
To determine how many 80 lb. bags of concrete mix are needed to fill an oil drum, first calculate the volume of the drum. A standard oil drum has a capacity of about 55 gallons, which is approximately 0.2 cubic meters or 7.4 cubic feet. Since an 80 lb. bag of concrete mix typically covers about 0.6 cubic feet, you would need roughly 12 to 13 bags to fill the drum completely.
How much concrete will it take to cement a 40 foot by 40 ft 6 inches deep?
800 C feet
How much pressure does it take to crush concrete?
According toUniversityof California, Lawrence Livermore National LaboratorytheCompressive strength of typical construction concrete is 5000 lb/in2I have read that specialty blends can exceed this by more than a factor of 6.
How many 80 pound bags it take to fill a hole with concrete measuring 18 x 12 x 48?
10 bags. Each 80 lb bag is 0.6 cubic feet, and your hole is 6 cubic feet.
What is the setting time of concrete?
The length of time that concrete takes to set, will depend on the temperature. It would take approximately 4 hours for concrete to set at a temperature of 80 degrees.
10x10x4inhow much concrete does it take to fill this?
1.2345 yards
If you drill a hole 40 feet deep by 24 inches in diameter how much concrete will it take to fill it in?
18.6240 yd³
How much concrete does it take to fill a 10 inch wide x 36 inch deep hole?
Depends on the length of the hole.
How much concrete does it take to fill 6 inch diameter pipe seven foot long?
Approx 10.3 US gallons.
How much concrete would it take to fill a trench 25' long x 10' wide x 6 thick?
1,500 ft.
How many yards of concrete will it take to fill a 15' by 15' area?
How deep? 1 inch will take .7 yards
How much gas do it take to fill up 2009 dodge caravan?
how much gas does it take to fill up 2009 dodge caavan.
How do you calculate the volume of concrete needed to fill a 55 gallon drum?
To calculate the volume of concrete needed to fill a 55-gallon drum, you first need to know the dimensions of the drum. Once you have the dimensions, you can use the formula for the volume of a cylinder (V = πr^2h) to calculate the volume of concrete required. Remember to convert the volume from gallons to cubic inches or feet for accurate results.
How do you remove cover on plastic pail?
you take it to a dentist
How much concrete did take to build lake pontchartrain causeway?
10000yds
How many yards of concrete will it take to fill a square hole 8 inch by 8 inch by 6 feet deep?
.99 yds
How many 12 inch by 12 inch concrete stepping stones will it take to fill a 342 square foot area?
342342342342
