0
What else can I help you with?
Is a 24VDC power supply short-circuit protected?
That would depend on the power supply.
What is the significance of the wires running from the power supply?
they deliver the power to something that can use it
What will happen if i connect a power supply of higher current rating to lower current load?
The supply won't have to work as hard. It is perfectly acceptable, for example, to use a 1A, 12v supply to supply a 12v, .5A load. The current rating indicates the ability of the supply to dissipate heat caused by the current flowing. If the load current is above the power supply current rating, the power supply will overheat.
Full form of DC power supply?
DC Power is Direct Current Power Supply.
What is theTransformer rating in a power supply?
a power supply must deliver xxx watts to a load the transformer must match the load capabilities plus its own loss
Is a 24VDC power supply short-circuit protected?
That would depend on the power supply.
A power source can deliver what two types of current?
Power supplies can supply AC or DC current.
What is diffrenence between 24vdc sov 110vac?
The main difference between a 24VDC solenoid valve and a 110VAC solenoid valve is the voltage they operate on. The 24VDC solenoid valve operates on 24 volts of direct current, whereas the 110VAC solenoid valve operates on 110 volts of alternating current. The choice between them depends on the power supply available and the specific application requirements.
What is the value of resister in 4-20ma transmitter at 24vdc power supply?
24 milli omps
What will happen if use a 12v 500ma instead of 12v 300ma?
Using a 12V 500mA power supply instead of a 12V 300mA power supply will likely be fine as long as the voltage matches, but the higher current capacity (500mA) means the power supply can deliver more current if needed by the device. The device will only draw the current it needs, so having a higher current capacity power supply should not cause any issues.
What is the significance of the wires running from the power supply?
they deliver the power to something that can use it
What will happen if i connect a power supply of higher current rating to lower current load?
The supply won't have to work as hard. It is perfectly acceptable, for example, to use a 1A, 12v supply to supply a 12v, .5A load. The current rating indicates the ability of the supply to dissipate heat caused by the current flowing. If the load current is above the power supply current rating, the power supply will overheat.
What is a power supply measured in?
A power supply is typically measured in watts (W), which indicates the amount of power it can deliver to a device. Additionally, voltage (V) and current (A) are also important measurements, as they define the electrical potential and flow, respectively. Together, these measurements help determine the compatibility and performance of a power supply with specific electronic components or systems.
Full form of DC power supply?
DC Power is Direct Current Power Supply.
Can a 12V 3.5A lcd monitor be replaced with a 12V 4.5A power supply?
Yes, you can replace a 12V 3.5A power supply with a 12V 4.5A power supply. The higher amperage rating means the new power supply can deliver more current if needed, which can be beneficial for electronics that may have varying power demands. Just ensure that the new power supply has the correct voltage and polarity to avoid damaging the monitor.
What is the current called when it flows from and back to the power supply in a parallel circuit?
The current that flows from and back to the power supply in a parallel circuit is called branch current. Each branch in a parallel circuit has its own current flow that combines to form the total current drawn from the power supply.
Can you use a 12v dc 1a power supply on device that requires 12v dc 3200ma?
No, the 1A power supply does not provide enough current (3200mA required) for the device to operate properly. You need a power supply that can deliver at least 3200mA to meet the device's power requirements. Using an underpowered supply may result in the device not functioning correctly or potential damage.
