answersLogoWhite

0

you just need 20 bucks and some bud and ill give u mine

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Engineering

What is the cost of wind turbines?

What does it cost to build a wind turbine? Capital costs for wind projects are $1,500 - $2,000 per kilowatt of nameplate capacity. How does the cost of wind energy compare to other energy sources? Wind-generated electricity has become more economical to produce in the past 10 years, dropping from as much as 30 cents per kilowatt-hour to 4.5 to 7.5 cents, making it more competitive with other energy sources. The cost to develop and build a wind energy facility is approximately $1.3 million to $1.7 million per megawatt, compared to a cost for gas-fired energy generation of $800,000 per megawatt.


How many watts does an eighty foot tall wind turbine produce?

The height of a wind turbine has no impact on the turbine's output wattage. The factors that effect the watts produced are: * The efficiency of turbine design (this is at most 59%) * the density of the air * the radius of the turbine (that is, the length of each fin) * the velocity of the wind passing through the turbine An 80 ft tall turbine would presumably have a fin length (that is, turbine radius) of at most 30 ft. Thus, at sea level on a 59 degree (F) day, in an 8 m/s (18mi/h) wind, with the most efficient turbine design possible, you would generate approximately 15.4 Kilowatts. See: http://en.wikipedia.org/wiki/Wind_turbine#Potential_turbine_power


How does a Ljungstrom steam turbine work and look like?

Ljungstrom Turbine is a Radial Outflow Steam Turbine with two counter rotating discs. Blades are mounted in circles one bigger than the other. Blades of one rotor work as nozzles for the other rotor blades. This turbine design is very forgiving on wet steam. It is said that the turbine design had limitations on scaling up above 30 MW and hence could not compete with Axial Flow Turbines.


How much does 6 inch PVC pipe cost per foot?

I found it for around $22/each for a 10ft length.If you prefer SCH40 PVC you're looking around $30/each for a 10ft length.


How much does ca6 cost per cubic yard?

The cost of CA6 gravel typically ranges from $15 to $30 per cubic yard, depending on factors such as location, supplier, and market conditions. Additional costs may apply for delivery and installation. It's best to check with local suppliers for the most accurate pricing in your area.