answersLogoWhite

0

The cost to clean out a main sewer line typically ranges from $100 to $500, depending on factors such as the severity of the blockage, the method used (e.g., snaking vs. hydro jetting), and geographic location. More complex issues or extensive damage may require additional services, which can increase the overall cost. It's advisable to get quotes from multiple plumbers to find the best price and service.

User Avatar

AnswerBot

2mo ago

What else can I help you with?

Continue Learning about Engineering

Does toilet water go into the main sewer line?

yes


Why would both toilets in the house be overflowing when flushed?

The drain pipe has a blockage somewhere downstream from where the toilets are connected to the main sewer line from the house. All the drains in a house normally connect to one main line that either goes to the city sewer system or your septic tank. If you know where the sewer line exits the house, you could check there to see if the blockage is in the yard. Most sewer blockages are caused by tree roots, broken fittings, or crushed pipes. Good Luck


The main sewer line keeps getting clogged with tree roots in a 3 ft section of line. A plumber wants 8000 to sleeve the pipe. Can I just put an ABS pipe inside the clay pipe?

Most sewer lines do not run perfectly straight, also, you would not be able to get it into the main because there is an elbow where it connects. You can put copper sulphate down the line to kill the roots. Do it a couple of times a year.


How do you hook up sewer and water to a bathroom?

To hook up sewer and water to a bathroom, start by installing the drain line for the toilet, ensuring it connects to the main sewer line with proper slope for drainage. Next, connect the sink and shower drain lines to the main drain, using PVC or ABS piping. For water supply, run cold and hot water lines from the main supply to the bathroom fixtures, ensuring to install shut-off valves. Finally, make connections to the fixtures, checking for leaks and ensuring proper water flow.


When are manholes installed in sewer system?

Manholes are installed in a sewer system during the construction phase, typically after the main sewer lines are laid. They are strategically placed at regular intervals, usually every 250 to 300 feet, and at changes in direction, elevation, or diameter of the sewer line. Their primary purpose is to provide access for maintenance, inspection, and cleaning of the sewer system. Proper installation is crucial to ensure effective wastewater management and to prevent blockages.

Related Questions

How do basement toilets flush?

Either they are on a separate sewer line and connect to the main sewer line later on or they sewerage is pumped by means of a machine into the main sewer line.


Is a force main line the same as a sewer line?

Not exactly a sewer main normally flows by graviety and a forced main is a pumped system


Why is sewer water coming out of a pipe in your backyard?

A 3 or 4 inch pipe sticking straight up out of the ground? This is the clean out for the sewer line. If sewage is coming out of it, this means the sewer line is clogged or collapsed from there to the main city sewer. If you have a septic tank, the tank is full and needs to be pumped out.


What problems might occur if I don't keep my sewer lines clean?

The obvious and main problem (and reason to keep your sewer lines clean) is because a backed-up sewer line means that sewage can get backed up into sinks and bathtubs. This is unsanitary and a health hazard. A broken sewage line is costly to repair.


What size main sewer line is required to have 3 toilets in a house?

3" house (building) drain allowable. 4" building sewer line needed for house from sewer main.


What materials are used to attach a sewer thimble to the main sewer line?

bass


Where is the sewer cleanout located on the side of the house?

The sewer cleanout is typically located on the side of the house near the main sewer line.


Is it necessary for a home owner to worry about sewer cleaning?

Every home owner should be knowledgeable about their sewers and drains. It is necessary to have them cleaned periodically. The main sewer line should be clean and drains should be grime-free.


What is the minimum grade for a 150mm main sewer line?

1%


Does toilet water go into the main sewer line?

yes


What is the cause of sewer backup when all vents and drains and sewer lines are clear?

You may not have a backflow preventer in the main line. This prevents anything coming back from the main line. It may be coming from your neighbors above you on the line.


What a water or sewer main?

A water or sewer main is as it sounds ,It is the main feed line that runs underground usually along side a street or easement from your house or place of business to connect you to these utilities.