0
What else can I help you with?
How much clearance distance must be maintained between mobile equipment and hug voltage conductors?
The required clearance distance between mobile equipment and high voltage conductors varies based on the voltage level and applicable safety regulations. Generally, the National Electrical Safety Code (NESC) recommends maintaining a minimum clearance of 10 feet for voltages up to 50 kV, with increased distances for higher voltages. It's essential to consult local regulations and guidelines to ensure compliance and safety. Always prioritize safety and utilize proper equipment and training when working near high voltage areas.
What are 2 advantages for this particular control voltage?
With voltage control there is so much voltage drop due to resistor, that's the disadvantage
What component generates the high voltage necessary to make a spark in a vehicle?
The component that generates the high voltage necessary to make a spark in a vehicle is the ignition coil. It converts the low voltage from the battery into a much higher voltage, typically between 12,000 to 45,000 volts, which is needed to create a spark at the spark plug. This high voltage ignites the air-fuel mixture in the engine's combustion chamber, enabling the engine to run.
How much clearence between phase to phase in 10 kV supply?
The clearance depends on the voltage and would be defined in the electrical regulations in your country. <<>> The minimum horizontal spacing of conductors on the same supporting structure not exceeding 15 kV and not over a span of 50 metres (164 feet) is 400 mm (16 inches).
How much voltage is 75 vrms?
Vrms=Vm/1.414................... from this u can find Vm.....magnitude of voltage.
How much high voltage cable is there on a reel?
300 feet
How much voltage the alternator of Skoda octavia gives?
the alternator voltage at the battery should be between 12.4voltsv-13.6 volts
How much does a black lepoard weigh answer this right now.?
If it's between five to six feet in length from head to tip of tail, it can weigh 140-220 pounds.
How much is 10 feet of water head in bar?
To convert feet of water head to bar, you can use the conversion factor where 1 foot of water is approximately equal to 0.02953 bar. Therefore, 10 feet of water head is about 0.2953 bar (10 feet × 0.02953 bar/foot).
How come when you stand on your head it starts to throb but when you stand on your feet they don?
our feet do not throb when we stand on them because they are meant to be stood on.Our head isn't meant to have to much weight on it because it is more delicate.
What is the relationship between capacitance and voltage in an electrical circuit?
The relationship between capacitance and voltage in an electrical circuit is that capacitance is a measure of how much charge a capacitor can store for a given voltage. In simple terms, the higher the capacitance, the more charge a capacitor can hold for a given voltage. Conversely, the higher the voltage applied to a capacitor, the more charge it can store for a given capacitance.
How long does a macaw get from head to tail?
It varies hyacinth macaws can be over 3 feet where as a mini macaw is much much smaller
How much yards is a feet?
The conversion between yard and feet are given .On finding the relation we get as follows . 1 yard =3 feet.
How much land could people get with the head right system?
50 Square feet acres of land
How much is 4 feet 10 inches in kilograms?
There is not enough Tylenol for the head ache you just gave me.
What animal has feet on his head?
There are no animals or insects that walk with their feet on their head. There are many insects that have horns on their heads but not feet.
How many people stretched head to toe equal one mile?
I dont really know, but measure how much feet you are, and measure how many feet a mile is.
