Voltmeters must be connected in parallel with the component or section of the circuit where the voltage is to be measured. This parallel connection allows the voltmeter to measure the potential difference across the component without significantly affecting the circuit's operation. It is important to ensure that the voltmeter has a high internal resistance to minimize the current flowing through it and avoid altering the circuit behavior.
Ammeters are connected in series with the load under test. This requires the load be disconnected from the source, and the ammeter placed in circuit. Voltmeters are connected in parallel with the load under test. This does not require any circuit changes. Sorry, but WikiAnswers does not support illustrations.
Parallel with any component like R or C or L or any 2 nodes of the circuit. Feel free connecting VMs anywhere in your circuit keeping in the proper Range/scale selector/AC-DC selector . That makes no damage
Depends. What did you want to measure? If it's voltage drop across the incandescent element, then you had better hook up your infinite resistance voltmeter in parallel with the lamp.
No, ammeters have a low internal resistance. This is so that when they are put in series with a circuit, they change the circuit's operating characteristics as little as possible.Contrast this with voltmeters, which do have a high internal resistance, and which are intended to be placed in parallel with the circuit they are measuring.Use the link below to the related question on why ammeters have a low internal resistance and read through that information to see why things are the way they are.
An ammeter is used to measure the current through a circuit and thus it must be in series with that load. Also, it's resistance is so low that it cannot be connected in parallel since it will result in a short circuit. A Voltmeter is intended to measure the voltage across a circuit and thus it must be connected in parallel. It has a very high resistance such that connecting it in series with a circuit will lender the circuit useless or inoperative.
Voltmeters are connected in parallel in a circuit.
Voltmeters are connected to simple series circuits the same way they are connected to any circuit. They are connected in parallel with the portion of the circuit for which you wish to measure the voltage drop.
Voltmeters are connected in parallel because they are designed to measure the voltage across a specific component or part of a circuit without affecting the overall current flow in the circuit. Connecting them in parallel ensures that they measure the voltage accurately without altering the circuit's behavior.
ammeters measure the flow of electricity voltmeters measure the pressure of electricity
voltmeters
Ammeters are connected in series with the load under test. This requires the load be disconnected from the source, and the ammeter placed in circuit. Voltmeters are connected in parallel with the load under test. This does not require any circuit changes. Sorry, but WikiAnswers does not support illustrations.
An Ohmmeter.
Parallel with any component like R or C or L or any 2 nodes of the circuit. Feel free connecting VMs anywhere in your circuit keeping in the proper Range/scale selector/AC-DC selector . That makes no damage
measures current in a circuit, must be series connected
in series
It should be connected to circuit breaker. Circuit breaker will automatically discontinue the flow of electricity if it detects faulty condition.
A voltmeter is a device to measure the voltage in a electric circuit, and must have be connected in parallel to it.