answersLogoWhite

0

What else can I help you with?

Continue Learning about Engineering

To produce greater storage of electrons and more capacitance capacitors should?

be connected in parallel


What are uses of series and parallel capacitor combination?

Capacitors may be connected in series to provide a capacitance with an effective working voltage higher than that of any of the individual units, (but the effective capacitance is less than that of any individual.) Capacitors may be connected in parallel to provide an effective capacitance value greater than that of any of the individual units, (but working voltage is equal to the lowest among the individuals).


What does electrolytic capacitor do?

The same thing as any other capacitor does (i.e. oppose changes in the voltage across it) except:it has much greater capacitance per volume than other capacitorshas higher leakage current than other capacitorsis polarized when all other capacitors are unpolarized


What does the mfd or uf rating of a capacitor mean?

The MFD (microfarads) or UF (microfarads) rating of a capacitor indicates its capacitance value, which measures the capacitor's ability to store electrical charge. One microfarad is equal to one-millionth of a farad, a standard unit of capacitance. Higher MFD or UF ratings signify a greater capacity to store charge, which can impact the performance of electrical circuits in applications like filtering, timing, and energy storage. Understanding this rating is crucial for selecting capacitors that meet the specific requirements of a circuit.


Why seres capacitors are used in transmission lines?

A poor power factor (due to large reactive loads) in a transmission system will reduce the voltage on local bus bars. Typically, especially for industrial facilities, there will be a large inductive component to the system loads, by installing shunt capacitors in close proximity to these loads the inductive component is effectively cancelled out, allowing the transmission lines to carry greater real power.[Once the capacitors are charged the reactive power demand of the inductive load is fulfilled by the charge/discharge cycle of the capacitors rather than by long-distance transmission of reactive power].

Related Questions

To produce greater storage of electrons and more capacitance capacitors should?

be connected in parallel


What are uses of series and parallel capacitor combination?

Capacitors may be connected in series to provide a capacitance with an effective working voltage higher than that of any of the individual units, (but the effective capacitance is less than that of any individual.) Capacitors may be connected in parallel to provide an effective capacitance value greater than that of any of the individual units, (but working voltage is equal to the lowest among the individuals).


Does the stray capacitance or the resistance of the monitor cable have the greater effect on the monitor's color?

no


What does electrolytic capacitor do?

The same thing as any other capacitor does (i.e. oppose changes in the voltage across it) except:it has much greater capacitance per volume than other capacitorshas higher leakage current than other capacitorsis polarized when all other capacitors are unpolarized


Five capacitor replacement rules?

To replace a capacitoræyou must make sure that the replacement capacitors voltageæis equal or greater than the original, the microfarad (or strength rating)æis +/- 10 % of the original runæcapacitor, the microfarad of theæstart capacitor is +/- 20% of the original, for capacitors that are wired in parallell the microfarad must be equal to the sum of the individual capacitors, for capacitors that are wired in series the microfaradæis equal the reciprocal of the sum of the reciprocals of the individual capacitors.


What does the mfd or uf rating of a capacitor mean?

The MFD (microfarads) or UF (microfarads) rating of a capacitor indicates its capacitance value, which measures the capacitor's ability to store electrical charge. One microfarad is equal to one-millionth of a farad, a standard unit of capacitance. Higher MFD or UF ratings signify a greater capacity to store charge, which can impact the performance of electrical circuits in applications like filtering, timing, and energy storage. Understanding this rating is crucial for selecting capacitors that meet the specific requirements of a circuit.


Why seres capacitors are used in transmission lines?

A poor power factor (due to large reactive loads) in a transmission system will reduce the voltage on local bus bars. Typically, especially for industrial facilities, there will be a large inductive component to the system loads, by installing shunt capacitors in close proximity to these loads the inductive component is effectively cancelled out, allowing the transmission lines to carry greater real power.[Once the capacitors are charged the reactive power demand of the inductive load is fulfilled by the charge/discharge cycle of the capacitors rather than by long-distance transmission of reactive power].


What happens if capacitance of circuit is more than resistance?

Resistance is a completely different quantity to capacitance, resistance being measured in ohms and capacitance in farads. So they are 'apples and oranges'. You should be asking, 'What happens if capacitive reactance (in ohms) is larger than resistance?'. And one answer would be that the phase angle will be greater than 45 degrees. There are other answers, too, but it depends what you want to know,


On what factors capacitance of a capacitor depends on?

The job of a capacitor is to store charge onto its plates. The amount of electrical charge that a capacitor can store on its plates is known as its Capacitance value and depends upon three main factors.The surface area, A of the two conductive plates which make up the capacitor, the larger the area the greater the capacitance.The distance, d between the two plates, the smaller the distance the greater the capacitance.The type of material which separates the two plates called the "dielectric", the higher the permittivity of the dielectric the greater the capacitance.


What happens to a capacitance if the volume is filled with material having a dielectric constant of 5?

The capacitance will increase. When the volume is filled with a material with a dielectric constant greater than 1, the capacitance of the capacitor increases by a factor equal to the material's dielectric constant. This is because the electric field is effectively reduced within the material, allowing more charge to be stored for the same voltage.


Who invented the series and parallel combination of cells?

Current travels in loops. In series you have one loop, or path for current to take. With parallel connections, there's at least two. This is why current divides in parallel and not in series.The usual problem here is to find the equivalent resistance, or capacitance. In the following formulae, R is the value of the equivalent resistance, while R1, R2, and R3 are the values of the...It can be used in the connection of emf..to have the greater current that we desired.so that it can produced a current.Capacitors may be connected in series to provide a capacitance with an effective working voltage higher than that of any of the individual units, (but the effective capacitance is less than that of... CommentTo answer the question... it was probably Count Alessandro Volta (1745 - 1827), an Italian physicist, credited with inventing the chemical battery.


Why is it not possible to make spherical conductor of capacity of 1 farad?

As Spherical Conductance = 4(pi)Eo r.If u need 1 F then calculate r(radius) u get 9 X 109 which is not possible 2 make..!!!ORThe capacitance of a conducting sphere of radius R is given byHence for the planet earth: about 709 µFThus for 1 F the radius is about 140 times greater than earth's radius.