0
What else can I help you with?
How can you find a resistance of resistor without DMM explain the method with the help of example?
Hi You can find the value of the resistor by using colour code printed on the resistor. 1. Hold the resistor such that the colour code starts from left. 2. Each of the colour bands present on the resistor specifies a value. 3. The first colour band represents the first significant figure, the second band represents the second significant figure and the third band indicates the multiplier. The fourth band represents the tolerance. Gold band- 5%, Silver band-10%, No band-20% 4.Find the appropriate values for the colour by using the chart 1. 5. Find the value of the resistor by using the formula 1. Chart1 Example: Here first band represent brown. Second band represent black. Third band represent red . Fourth band represent gold. The value of resistor = 10 x 102 ± 5% = 1kΩ ± 5%
What does the tolerance band on a resistor do?
A: It just tell you the resistor has a +- % tolerance in its value. Like a 1000 ohms +-5% it can be off + or - that much. That has being the standard for forever however that band is disappearing since most resistors are made +-5% as a rule.
What is the output voltage of digital receivers?
The output voltage of a digital receiver will vary depending on the design and manufacture of the particular receiver, and the output system used. It is normally quite low, typically between 1 and 5 volts, ranging up to 12 for some SCART connections.
How do you reprogram the key to work the infra red receiver on a Peugeot 405?
If it is the same as the 306, which I would of thought likely, off the top of my head you get your spare key and set it to 'a' position in the ignition barrel. The new remote key you then point at the infra red receiver and hold the button down for 5-10 seconds. Hopefully then if you remove the spare key, the remote locking should then work.
What is narrow band and wide band FM and How it can be generated?
In frequency modulation system, the maximum usable deviation be fixed +- 5 KHz and test deviation be kept 60% i.e. 3 KHz for wireless telephony systems used in military and other organisations. But wide band fm systems used in commercial broadcasts having frequency deviation +- 75 KHz.
What is the cst for pcb?
The cost of PCB (Printed Circuit Board) can vary depending on factors such as size, complexity, material, and quantity. Generally, a basic single-layer PCB can cost around $5 to $20 per board, while more complex multi-layer boards with advanced features can cost hundreds of dollars per board. It is advisable to obtain quotes from multiple PCB manufacturers to get an accurate cost estimate.
Whats the difference between a stereo receiver and a channel stereo receiver?
They're both the same. A "channel" stereo receiver merely accepts a given number of channels (2,4,5, &tc.). A stereo receiver has 2 channels of audio output, left and right. A receiver marked as ___ channel receiver has the corresponding number of channels. For instance a 5 channel stereo receiver can play 5 different channels of audio through 5 speakers. If the receiver has a decimal, such as 5.1 or 7.1, that indicates that it has 5 or 7 channels of regular audio, plus 1 channel for subwoofer, making them 6 and 8 channels, respectively.
Where is the serial number on a browning a 5?
on the bottom of the receiver
Where is the serial number on a browning auto 5?
On the receiver.
Where is the serial number on a browning a-5 shotgun?
On the receiver.
Is 5 Leo rise a real band?
Its is a fictional boy band in the movie Taking 5! 5 Leo Rise is played by the famous band The Click 5!
What is band 5 in IBM?
Band 5 can be a Trainer. infact consider it to be first proper growth from band 3
Questions asked at amity university during interview?
there are generally 5-6 question of pcb/pcm & a essay on current topics
What is the pay scale for receiver at Tractor supply in TX?
After working there for 5 years full time receiver I make 9.30 hr
What does error code 90 mean on an AEG washer dryer?
Error code 90 on an AEG washer dryer means a loose connection between the main pcb to the display pcb. In total there are 5 blue wires which can be seen by removing the lid which could potentially be loose.
Was the Jackson 5 a rock band?
No they were a pop band.
Can you bump a recEIver before 5 yards?
Yes, this is called "jamming"
