0
What else can I help you with?
How do resistance behave in parallel circuit?
in a parallel circuit resistance decreases increasing the current.
How do the partial voltages behave in relation to the corresponding resistance value?
In a series circuit, the partial voltages across each resistor are directly proportional to their resistance values. According to Ohm's Law (V = IR), a higher resistance will result in a greater voltage drop across that resistor when the current is constant. Conversely, a lower resistance will yield a smaller voltage drop. Therefore, in a series circuit, resistors with larger values will have larger voltage drops compared to those with smaller values.
Why does the synchroscope need to be rotating clockwise if it is turning slowly counterclockwise won't that work the same?
because the incoming generator has be connected as a source and not a load to the grid. if the frequency of the incoming generator is lower than the grid frequency then ... it will behave as a motor drawing power from the grid and generator will trip in reverse power protection.
Why is the field left energized during dynamic braking?
the field is left energized in order that the motor behave like a generator producing an magnetic field in the opposed direction of rotation
Why synchronous motor is called synchronous capacitors?
A synchronous motor can operate as either a Generator or a Motor.When a synchronous motor has current applied to the windings on its rotor and the stator is energized with say a 50hz line supply (with little or no physical load) then the exact amount of excitation provided by the rotor can determine whether the stator displays inductive or capacitive properties.If the rotor is under excited (too Little rotor current) the Synchronous Motor will behave as an Inductor, however if the rotor is over excited then the Synchronous Motor will behave like a Capacitor.Hope this helps
What causes insulators to behave the way they do?
Insulators behave the way they do because they have high resistance to the flow of electricity, which prevents the passage of electric current through them. This high resistance is due to the structure of insulator materials, which restrict the movement of electrons and impede the flow of electricity.
How does voltage and resistance behave in a series and a parallel circuit?
The current through each resistor is equal to the voltage across it divided by its resistance for series and parallel circuits.
How do resistance behave in parallel circuit?
in a parallel circuit resistance decreases increasing the current.
Why does the synchroscope need to be rotating clockwise if it is turning slowly counterclockwise won't that work the same?
because the incoming generator has be connected as a source and not a load to the grid. if the frequency of the incoming generator is lower than the grid frequency then ... it will behave as a motor drawing power from the grid and generator will trip in reverse power protection.
Why is the field left energized during dynamic braking?
the field is left energized in order that the motor behave like a generator producing an magnetic field in the opposed direction of rotation
Describe what sociological behavior is all about?
Seeing the greater picture of society and how society plays a role in how we behave, think, and act.
How do the partial current behave in relation to the corresponding resistance value for parallel circuiting of resistors?
The ratio of current flow through individual branches of a parallel circuit is inversely proportional to the ratio of resistance of each branch.
What does defiantly?
The word defiantly means to behave badly or act with cold disobedience.
What are ethics in oral communication?
Ethics" can be defined as the critical, structured examination of how we should behave --- in particular, how we should constrain the pursuit of self-interest when our actions affect others
Why co2 cannot be liquified at 308k?
At 308K, carbon dioxide is above its critical temperature of 304.25K. This means that it cannot exist as a liquid under those conditions, as it would be above its critical point and would behave as a supercritical fluid instead of distinct liquid and gas phases.
Can a gas engine be used as a resistor?
A gas engine cannot be used as a resistor in the traditional sense, as its primary function is to convert fuel into mechanical energy rather than dissipate electrical energy as heat. However, if the engine is coupled to a generator, it can indirectly contribute to electrical resistance by providing power to an electrical load. In this scenario, the engine's efficiency and operation would determine the electrical characteristics, but it would not behave like a simple resistive element.
Is eletricity similar to water and both follow the same path of least resistance?
Electricity and water both follow the path of least resistance, but they behave differently. Electricity flows through conductive materials, while water flows through pathways like pipes. The concept of least resistance applies to both when they seek the easiest route to flow.
